Thomson Televison & Video - Popular Questions, Answers, Tips & Manuals

Could be failing power supply

yes find another repair guy

Go-to setting and choose language

How did you connect tv to player? Hdmi, composite, scart, component?

SEE this: Universal Remote Control for TCL TV for Thomson for ERISSON Controller... Under $7 Anthony

Here is the manual if that helps http://onesourcebook.com/download/thomson-pvr-jl8006-manual.pdf

Flashing red indicates internal shutdown due to fault protection. Only a tech can diagnose the fault (and hopefully repair it). Good luck with getting it done quickly. :) Clive.

I am just guessing but you may have an ant-copy signal embedded into program signal causing to when you are trying to look at a recording to another source. If that is the case then there is one way that would work. You need to connect inline with the video line out to the in of the other unit (yellow) and that would solve the problem. Go to xdimax.com and check out a dimax signal adaptor( can not recall what it goes by,description-wise) This is almost like trying to use a hdmi output and a audio/video connection at the same time.This also happened when doing the same with some video decks (vcr)

Corrupted firmware. An update is necessary. Contact any service technician. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

hi not sure if this will work but you can still try To carry out a factory reset. Menu 4 (set up ) 6 (help ) then press the green button. To restore the factory settings,then press the red button. work but you can try it, thanks shaun

Check it's speaker/s first. If found OK, check and replace the damaged components at its audio output stage circuit. If you wish to get more details visit the site linked here. http://electronicshelponline.blogspot.com/ http://schematicscom.blogspot.com/ circuit diagrams of many popular brand sets are given. Search the site by type in the brand name of your set in the search box at the top right of the display window to get gathered all the related posts.

If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Search the site by type in this key phrase "How to unlock the region code"; in the search box at the top left of the display window, to get gathered related posts.

If you wish to buy it's original remote control, just contact the authorized service center for Thomson. To select a universal remote control, make sure about the set up codes for t Thomson, and buy a remote control of that brand, from open electronics spare part market. Refer the sites linked here for more details about the codes. http://elecrtohelponline.blogspot.com/ http://remotesearch.blogspot.com/ http://homenol.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Unlock procedure and to override the password lock of many popular brand TVs and other devices are given. Search the site by type in this key phrase "How to unlock television"; in the search box at the top left of the display window, to get gathered related posts.

goto this link you might find it. https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=Thomson+a3305+instructions

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ http://schematicscom.blogspot.com/ http://electrotechnician.blogspot.com/ Circuit diagrams of many popular brand TVs and other devices are given

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ http://schematicscom.blogspot.com/ Circuit diagrams of many popular brand TVs and other devices are given.

The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

I do not know specific on this model (which youdid not give a model number) The most possible cause is capacitors which fail but also other parts or software issues can be at fault. Sets like most modern types have a start up routine which verifies sections of you set are working correctly before fully powering up, so if a fault is found just shut down. There may well be a known part or parts but sets are made with components fitted by passing through "ovens" to make solder joints, these are at higher temperatures than normal tin/lead and standard irons are mostly not able to melt it without damage to track etc. My advice is to contact Thomson (French electronics giant) for their nearest service agent a far better solution than to try yourself, many of the "thin" sets after a couple of years (out of guarantee) are not fixable because they require panel changes which soon run out of stock if many go wrong, sad but true. Hope this helps........