Teac Televison & Video - Recent Questions, Troubleshooting & Support


Hi Kylie, indicate model of your TV Teac that you are commenting, to be able to find the best possible solution
I wait your answer
Greetings Franco Dosil

Hola Kylie, indica modelo de tu TV Teac que estas comentando, para poder encontrar la mejor soluci?n posible
Espero tu respuesta
Saludos Franco Dosil

Teac Televison &... | Answered on Aug 12, 2019


Data Base Empty means you don't have an aerial connected. Check that it is in the RF connector and not the coax port. common mistake

Teac Televison &... | Answered on Jun 11, 2019


This is not a TEAC Model number for a 22" TV. TEAC only produced 2 LEDV 22 models. Either a LEDV2282FHD or LEDV22U83FHD. If there is no standby light then check the rocker switch located on the TV while powerpoint is on, if no result then there is a fault on the Power PCB

Teac Televison &... | Answered on Jun 11, 2019


There are no codes. TEAC consider remotes "proprietary" and do not release the codes to 3rd parties. Get a Genuine one

Teac Televison &... | Answered on Jun 11, 2019


There are no codes. TEAC consider remotes "proprietary" and do not release the codes to 3rd parties. Get a Genuine one

Teac Televison &... | Answered on Jun 11, 2019


Unfortunately, you can't. Installation is a multi step selection process and using the buttons on unit will only allow single selection within a menu. Get a Genuine remote

Teac Televison &... | Answered on Jun 11, 2019


It is 1 of 2 things, Firmware or something on the Main PCB has failed. Firmware is free. email me a request and serial number of TV (Barcode on white sticker on back). I will send it out with instructions.
neville.ellis@installandfix.com

Teac Televison &... | Answered on Jun 11, 2019


The Firmware needs to be re installed. email me with a request and model number and I will send out the instructions that will included the link to get the firmware.
neville.ellis@installandfix.com

Teac USB2 TV... | Answered on Jun 11, 2019


If there is one it will be listed on your remote control manufacturers web site.

Teac Televison &... | Answered on Jun 08, 2019


The code would be found in the remote controls, if they are compatible.

Teac Televison &... | Answered on Jun 06, 2019


Hello Andrew, I think the first thing you should check is the antenna connection, the connector is well-armed, the cable is properly positioned, no hair mesh is in contact with the central conductor
You could try, connecting to the FM antenna input, to see if you tune something, if you can not tune anything, I would check the cable and its connectors, I send you the link so you can download the user manual
I hope you can tune in to your stations
Greeting Franco Dosil

Hola Andrew, creo que lo primero que deber?as chequear es la conexi?n de la antena, que el conector se encuentre bien armado, que el cable se encuentre bien colocado, que ning?n pelo de la malla se encuentre en contacto con el conductor central
Podr?as probar, conectando en la entrada de antena de FM, a ver si sintoniza algo, si no logras sintonizar nada, revisar?a el cable y sus conectores, te env?o el link para que puedas descargar el manual de usuario
Espero que logres sintonizar tus estaciones
Saludo Franco Dosil

https://data2.manualslib.com/pdf3/76/7583/758218-teac/th300dab.pdf?50469aa68dd82322de1381f6b0982740&take=binary

Teac Televison &... | Answered on May 03, 2019


Hi John, for what your Teac says, you are not completing the start sequence, I suggest you disconnect the Teac, for more than half an hour and after that time connect it and see if it turns on
another possibility is that you need a Firmware update
The Firmware can be updated through the USB port. Once you have downloaded the firmware
from www.teac.com.au, place it on a USB stick. Please make sure that the USB memory does not have
other files stored on it other than the required software file
With the Teac HDR9650TS DV Recorder, unplugged, place the USB memory into the USB connector, then turn on the computer and wait for the power-up sequence to complete
I send you the link to download the service manual
I hope he manages to solve the problem
Greetings Franco Dosil

Hola John, por lo que comenta su Teac, no esta completando la secuencia de inicio, le sugiero desconectar el Teac, por mas de media hora y transcurrido ese tiempo re conectarlo y ver si enciende
otra posibilidad es que necesite una actualizaci?n del Firmware
El Firmware se puede actualizar a trav?s del puerto USB. Una vez que hayas descargado el firmware
desde www.teac.com.au, col?quelo en una memoria USB. Por favor, aseg?rese de que la memoria USB no tiene
otros archivos almacenados en ?l que no sea el archivo de software requerido
Con el Teac HDR9650TS DV Recorder, desenchufado, coloque la memoria USB en el conector USB, luego prenda el equipo y espere que se complete la secuencia de encendido
Le env?o el link para que descargue el manual de servicio
Espero que logre resolver el problema
Saludos Franco Dosil

https://www.manualslib.com/manual/764925/Teac-Hdr9650ts.html

Teac Televison &... | Answered on May 03, 2019


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. See the site by a desktop. Mobile view has no search box. If you are viewing it by your mobile, see it in webview.]/

Teac Televison &... | Answered on Apr 13, 2019

Not finding what you are looking for?
Teac Logo

271 questions posted

Ask a Question

Usually answered in minutes!

Top Teac Televison & Video Experts

JOHN TOPLISS

Level 2 Expert

180 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Nidhish Ganga
Nidhish Ganga

Level 2 Expert

104 Answers

Are you a Teac Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...