Taylor Health & Beauty - Recent Questions, Troubleshooting & Support


Page 3 of the manual.

2 x CR2032 Lithium batteries.

That is a large button cell battery used as motherboard BIOS backup, and also in home weather stations. Available in all large pharmacies and some supermarkets.

http://www.scalemanuals.com/taylormanuals/7206bl-manual.pdf

Taylor Health &... | Answered on Feb 14, 2020


hard to say. did they come in genuine packaging?

Taylor Health &... | Answered on Jan 08, 2020


BMI + BMR do not show up when the scale is set in child mode. It's possible you have it set on child, instead of male/female. I have the manual uploaded on photobucket if you needed it.

http://s1125.photobucket.com/albums/l587/landofnarnia/Taylor%205568%20Scale/

Amy

Taylor 5568 Fat... | Answered on Jan 05, 2020


Is a measurement to determine a persons weight over height the formula is weight(KG) / height(METRES), a normal healthy person should have a bmi of 18.5 to 25 anything above this means the person is fat to obese

Taylor Body Mass... | Answered on Jan 05, 2020


If you need scales recalibrated, I don't know who does that work in your area. I would check with where you bought them to find out if the work can be done.

Taylor Health &... | Answered on Jan 05, 2020


1. Remove screws from the battery compartment cover on the bottom of the scale and remove the cover.
2. Remove the old battery from the compartment.
3. Place the new battery into the battery compartment.
4. Replace the battery compartment cover and screws.

Taylor Health &... | Answered on Dec 02, 2019


Battery must be 3V CR2032 and the + sign goes up with scale upside down ( + visible when inserted).

Taylor & Digital... | Answered on Sep 27, 2019


Flip over the scale, on the back there is a black button, slide it to pounds.

Taylor 5599 440... | Answered on Sep 03, 2019


Model COMP825 The battery is easy to access from the bottom of the cube. 1. Lay the unit onto a towel with the display facing down. 2. Now having easy access to the bottom of the cube you will note a large base plate is screwed to the four corner feet of the cube by two screws in each corner. Using a Phillips head screwdriver, gently remove these eight screws. Lift the plate away. The four feet will also lift away. 3. Another cover plate will be revealed. Remove the small screws from this cover plate. Lift the plate away.
4. The small battery cover plate will be revealed at the top. Remove the small screws from this cover plate. Lift the plate away. 5. The base of the battery will be revealed. Gently pull the battery out as far as you can to show the two leads connected to the top of the battery. 6. Remove the leads from the battery by sliding the clips off the terminals. Note which lead goes on the terminal marked red. 7. Attach the leads to the new battery ensuring that the correct lead goes on the terminal marked red. Slide the battery back into the recess. 8. Replace all cover plates and feet of the cube.

Taylor & Digital... | Answered on May 26, 2019


This means overload....either the weighed object is too heavy for the machine or it's problem with the scale.

Taylor Health &... | Answered on May 21, 2019


Google (taylor)(5749FW)(manual) without parens.

Taylor Health &... | Answered on May 06, 2019


This is a reply I received from Taylor customer support. I have followed this procedure enough times to wear out the original battery and still get the Err 1 message. You may have better luck.

Thank you for your e-mail. The reboot below may clear the error from
your scale. You may need to do this several times to completely reboot
the system. Please let us know if you have any questions or continue to
display the Error.


1. Remove the battery from the scale
2. Set the scale on the floor without the battery in place.
3. Stand on the scale for 10 seconds (still without the battery)
4. Carefully replace the battery without turning the scale on.
5. Using only one foot, tap the scale or apply just enough pressure to
turn on the display. (It should show dashes or zero's) IMMEDIATELY
REMOVE YOUR FOOT.
6. Let the scale turn off
7. Step on the scale for a weight reading


Regards,


Linda DLT
Consumer Relations
Taylor Precision Products
& Salter Housewares
2220 Entrada del Sol, Suite A
Las Cruces, NM 88001
Toll free - 800-289-0944
866-843-3905
Direct - 575-526-0944 ext 3172

Taylor & Digital... | Answered on Mar 22, 2019

Not finding what you are looking for?
Taylor Logo

775 questions posted

Ask a Question

Usually answered in minutes!

Top Taylor Health & Beauty Experts

Cindy Wells

Level 3 Expert

6073 Answers

rebecca curry

Level 2 Expert

65 Answers

ray gallant

Level 3 Expert

66484 Answers

Are you a Taylor Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...