Sylvania Televison & Video - Page 8 - Answered Questions & Fixed Issues

This may be a stretch, but I had a similar prollum and don't have the TV remote. I have DirecTV, and I accidently fixed the prob by pressing (and holding) the ENTER button on my DirecTV remote. It's next to the 0 (zero) on the number pad. That's all I can tell ya. If you don't have DirecTV or some other remote, dunno what would help. Jim

Do a factory reset and it should work again

Chances are its a panel issue

Remove the stand first then all the screws with arrows marked on the case...it should come off then...Try removing and re connecting the LVDS cable along with the ones that go from the TCON board to the panel but use extreme caution when removing those. There is a greater chance of a bad TCON board than bad cables

Yes the drive wheel gets hard and shiny after time I have had succes scoring lines into it Good luck

Get new batteries for remote and go to web site for manual download. Or google for it.

Use the zoom feature on the remote to shrink it down.

If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done. NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important. Search the site by type in the "brand name" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Replace it by warranty.

If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Your tv may not be compatible with progressive scan mode. Change the latter.

I see no question here?

That part number BA71F0F01042 is for the power supply. You can find someone on Flea bay that are selling it. Where did you find the other part number?

Check this video out. How to replace lithium battery on Philips portable DVD player for less...

HELLO THERE YOU NEED BUY NEED MANUEL AND SEARCH MODEL AND NUMBER

is there an input at the front of the tv . if the co ax is damaged on the tv use the dvd to tune rf from antenna and feed in from front av in

I suspect you have simply switched to an unused input. If you use the original remote you can probably switch the input readily back to what you want. Dave

I believe you have to have a remote to set your picture to the right size. You can get a universal remote that is recommended for your television set.

The head set won't work on the aux the aux is for an input such as a mp3 player or phone . The tv should have it's own jack it will say headphones or have a picture of headphones on it just plug the headphones into the jack plug and you should get sound