Sylvania Televison & Video - Page 7 - Answered Questions & Fixed Issues

003,044,052,059,060,063,064,127,160,164,197 are the codes for your T.V

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ https://homenol.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main digital board./

If there's a setting that will show the whole picture, it's in the Menu under Picture: 1)Press the MENU button so that the menu display appears on the TV screen. 2)Press the VOL(ume)  button so that "PICTURE" is selected. 3)Select the feature you wish to adjust with the CH(annel)  or  button and adjust it with the VOL(ume)  or  button.

First, you can only get digital channels now,so you must have a tv that can receive digital. You can buy digital tv antennas that can receive about 70 miles that mount outside or in your attic. This FCC site can show you where to point the antenna to get the best signal:" https://www.fcc.gov/media/engineering/dtvmaps Also you can get a signal booster that will help if you can get a minimal signal. The booster will only amplify a signal so if you cant get one at all it won't help.

Try a different source like a dvd player and see if it works

Sylvania TVs are made by Funai Corp. You should try any Funai codes that are listed for the Synergy V remote. Alternatively, you can try the code search method, point and search. See http://help.rcn.com/pf/12/webfiles/files/ONNET6907/remotes/RC-U62CDR/index.htm#Point_and_Press_Programming for the details. One Synergy V remote code list is available in this copy of the manual: http://help.rcn.com/pf/12/webfiles/files/ONNET6907/remotes/RC-U63CDR/RC-U63CDR.pdf . I found the codes for Funai to be 047 048 157 168 211 . I hope this helps. Cindy Wells (For my TV, the search all codes is often better for universal remotes. The brand name codes listed didn't work; searching all codes found an exact match for all the features that I use.)

Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Pull up older posts. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. http://electronicshelponline.blogspot.com/

You need a more advanced universal remote, that's all. I had the problem too; my first universal remote had only power, channel, volume and guide. A better remote will be bigger with more buttons and have menu options you can use.

Sounds like you may need a new main board.

I recommend you do not fix It. LCD TVs are inexpensive today and have much better performance.

AS long as its a newer SD card you will be fine. Stick with name brands like Kingston, Samsung HP etc. Stay way from cheaper cards as they wont work as well.

Buy a new TV, its not worth repairing an old CRT set

Hello, Tom - If you choose not to purchase a universal remote control to use with your Sylvania TV, you can probably use the buttons along one side of the TV screen to adjust the color and whatever other aspects you wish to adjust. First, you will need to turn the TV on by pressing the Power or On/Off button for the TV. Then you will need to figure out what the other buttons on the side of the TV do. If you have the owner's manual refer to that. Without knowing the model number of your Sylania TV, I cannot find an owner's manual for you and give you the specific directions. If you wish, using the Edit feature, you can add the model number of your Sylvania TV so I or someone else can better help you.

Try replacing the Tcon board

Here's a PDF: https://www.manualslib.com/manual/720948/Sylvania-Sc-11100.html

We have no manuals, but try entering your information on your search engine of your computer. You should be successful.

Vertical scan output section circuit fault. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ Type in this key phrase " my service table today " in the search box at the top right of the display window of the home page, to get gathered some pages which has the details of practical experiences to the author of that site.

Something may have happened in the DVD unit to take out the main fuse in the power board, start by checking that

Hello... Somewhere in the same menu as the Air/Cable setting should be an option to scan for channels. It might be called Auto-Program, or something similar. The bad news is that: "On June 12, 2009, the Federal Communications Commission (FCC) mandated that all U.S. based television signals must be transmitted digitally." Since your TV was manufactured in 1992, it isn't capable of detecting or displaying digital channels. If you're really fond of the TV, you will need some sort of conversion box. If you can afford to, I'd recommend buying a new TV, and get the extended warranty. I hope this helps!

hi there. go to this link and see if it helps you get it sorted. How to Fix DVD Player When the Drawer Won Open Techwalla com . or this one. DVD tray will not eject the movie Google Search