Sonos Televison & Video - Recent Questions, Troubleshooting & Support
Sonos play 3 won't boot
If power cycling (pulling power and then putting it back in) does not resolve it, and the Mute button is not also blinking green when the status light is blinking white then it sounds like a bad player. Contact Sonos Support for options on replacement.
Controller cr200 won't turn on
Have you tried taking the battery out and putting it back in? If not, that is the first thing I would try. If pulling the battery and putting it back in and then charging it does not resolve the issue then I suggest contacting Sonos Support.
Windows7 not allowing the sharing of music files on PC to sonos250.
Have you setup the Sonos Desktop controller to look into the music folders you want to access? In the Sonos Desktop Control application on your computer, you go to Manage---->Music Library Settings, there you can point your Sonos to look into whichever library of music you want it to access.
How do i connect a sonos to bearshare
You can set up your sonos to look up the music in the folders you have bearshare pointed to download your files to. The only downside is that if its not on a network drive and it's on your computer you will always need your computer on to access the files.
How to remove child lock from BELTEK TV?
general steps:
Get the TV remote control and push the "Menu" button and select "Options".
Select "Child Lock" from the "Options" list. On some televisions, the "Child Lock" is named "V-chip".
Choose the "Remove Child Lock" selection. Highlight this and then hit the "Enter" button.
Enter the four-digit code that you used when you activated the child lock feature. If you cannot remember it, your only option to deactivate the child lock is to reset the TV. The instructions for resetting a TV is written on the user's manual of the TV.
Exit the TV menu once you have entered the four-digit code. To do this, press the "Exit" or "Menu" button on the TV's remote control.
If you don't have a remote, you might try leaving the TV unplugged overnight. Some TVs will 'forget' their settings if left without power for a long period. You could also potentially buy a cheaper universal remote, and use that to turn off the child lock.
How to pairing Ruwido Amadeus R 9710 to tv?
To pair your Ruwido Amadeus R 9710 remote to your TV, you can follow these steps:
Insert Batteries: Your remote is powered by two 1.5 V AAA batteries1. Make sure to insert the batteries correctly.
Switch on your TV: Ensure your TV is turned on.
Press the TV key: Press the TV key on your remote control for approximately 4 seconds until the LED flashes twice.
Enter the Code: After seeing the 2 flashes and within 5 seconds, enter the 3-digit numerical code from the list provided with your remote2. After entering the code, the LED will flash twice indicating that the code has been accepted.
Test the Remote: Point the remote control towards your TV and press the key. If your TV does not respond by going into Stand-By mode then repeat steps 3 to 5 and enter the next code in the list.
Bed.-Anl. H2 Version1 (ruwido.com)
Not finding what you are looking for?