Singer Toys - Popular Questions, Answers, Tips & Manuals

If you are speaking of a flat bed knitting machine, if you have enough needles, all you do is move the end stitch over 1 needle and then either pick up a purl stitch from one of the stitches next to it and put on the empty needle or just leave it there (the latter will make an eyelet), that is one way to increase with the hand knit version of M1. If you search Knitting Machine Increasing, you will find many, some are mine where there are others that show the same thing. hope this helps.

Customer Support ,,,

Well I found the manual for the KH210 (picture from that manual below), it may be similar but not sure. https://app.box.com/shared/3g5d0rq9q7/2/73526225/657550011/1 is the site. If it doesn't come up, then start here https://app.box.com/shared/3g5d0rq9q7 then click on Brother, then Knitting Machine and it is next to last on Page 2 of this section. Hope this helps. As I did get to look at it, the carriage is set up very similar to their plastic KX350 machine, so the levers on the side will be the same but will be more sturdier than the plastic bed.

As I had searched for your machine, it is quite different than the ones I have seen in my 25 years of machine knitting. I don't believe that Sears will help you on that and even if Sears did make that machine, it has been a long time since they had produced it. So it may be trial and error on how it works. From what I had seen, it looks to be a double bed already but I am not 100% sure on that. I bet that handle has something to do with it doing ribbing but again I am not 100% sure on it. But it does look like a neat machine. Hope this helps even if just a little. Roberta https://s-media-cache-ec0.pinimg.com/originals/57/f4/64/57f464c06e7ed6987788c205dccefb61.jpg

Hi, I had the same problem, the SB150 is now obsolete and you cannot get parts etc for it, I looked on eBay til I found one being sold which included a manual and sent a request to the seller to copy the manual for me. It happened to be a singer designer 2 manual but it's identical to my SB/150. I haven't yet had time to try it out, will let you know if it helps

• Email Address

  [email protected]

  After Sending Customer service email address

  Support Rank #4 This is the #1 email address and #4 overall way to contact Singer Sewing Co. customer service. Compare all of them here: Contact Singer Sewing Co. customer service

  63 mins Average Reply - 24 hours, 7 days

  Phone Number

  888-633-8635

  Talk to a Human Direct to human

  Useful tools & numbers to call Compare all options

  Call Time Average Wait: 31 mins - Monday through Friday, 8:00 a.m. to 4:00 p.m. C.T.

  Did this phone number work? Yes No Update this, please Help force companies to improve customer service. How

I dont know if this is enough for you but this site http://www.ehow.com/how_5523579_use-singer-deluxe-knitting-machine.html has a long how to opperate page w/ links to other sections. good luck...

How are you getting on? I'm just learning and I can't even cast on!! My stitches all stay on the front posts that are between the needles and I've no idea how to stop that. Would help if I had an instruction book.

I found a forum that has a series of site you may get the manual from.
please click here for details.
you may have to pay about $5 for a copy.

Regards

Try this site

http://knittsings.com/knitting-machine-manuals/

2 questions....

Did you ever find this piece?

Do you live on Lopez Island?

If you are in Australia like me (after a Memo Matic 321 manual) here are Singer Australia's contact details. I'm trying the email option.Contact UsPostal : PO Box 254 Seven Hills NSW 1730Office: Unit 17, 167 Prospect Highway Seven Hills NSW 2147Phone: +61 2 9620 5922Fax: +61 2 9620 5933Email Enquiries: [email protected]ABN: 71 083 060 271ACN: 083 060 271

You can probably order a copy by calling Singer at 800-474-6437.

hi there well firstly after 20yrs are you sure that you have threaded up all the masts correctly, and then using the correct tension on the dial, are you using a fancy yarn if so try with a standard yarn, you may need to use the weights and also another thought have you got the carriage set for plain knitting.. try using another area of the bed to the left or right then you could eliminate a problem with that area of needles. take a breath start slowly and double check through everything from the cone of yarn all the way through then check the carriage , is it on perfectly, etc, hope this helps a little thanks heidi

You can order a copy by calling Singer at 800-474-6437, they don't have a download version of this manual.

http://www.singerco.com/accessories/manuals.html

You will need the model number to find your manual. Some are free and some are for sale. good Luck


1-800-4-SINGER
Monday through Friday, 8:00 a.m. to 4:00 p.m. C.T.

Singer Sewing Company
1224 Heil Quaker Blvd.
P.O. Box 7017
LaVergne, TN 37086

Customer Service: 1-800-4-SINGER
Customer Service Fax: (615) 213-0994