Siemens Ovens - Answered Questions & Fixed Issues

Based on your description, it sounds like the problem may be with the function knob itself. It's possible that the knob is not making a proper connection with the oven's control system when turned to certain functions, which could explain why the oven doesn't heat up and the light doesn't turn on. Additionally, the fact that the oven sometimes stops heating and the light turns off on its own, and then starts again when you wiggle the knob, further supports this hypothesis. Replacing the function knob is a relatively easy and inexpensive first step to take in attempting to fix the problem. However, it's also possible that there may be a more complicated issue with the oven's control system or wiring, so if replacing the knob doesn't solve the problem, you may need to consult with a qualified technician to diagnose and fix the issue.

see if voltage to fan motor if no bad board if yes bad motor

bad control board

Possible bad door switch

If your electric oven does not heat up, does not heat up, but it works, most likely the problem is either in the thermostat or in the heating element

You wants new feelings ? add me. ?? You won't bedis??appointed! ?? write me ??==>> gg.gg/gs0ys

HB 76AU.60 A Siemens oven display has stopped working

The bottom locks to the top. Take a look at the video in the link below and you'll see what I'm talking about. It's not your microwave oven, but the door hinge is the same. https://bakingreview.com/oster-1-4-cubic-foot-digital-microwave-oven

The recipe is the one to follow, NOT stove. And always in center rack of oven. Too low burns underneath, too high burns top

Check your owners manual for instructions

https://www.manualslib.com/

possibly,but i would check both upper and lower elements are working first, lower element is hidden so test from the back with a multieter after removing oven fuse from the power box

i've never worked on your brand name stove but i want to tell you don't self clean it until after the holidays,when you self clean an oven it gets up to 1000 degrees,the heat can damage the electronics in the oven,if it does and you need a part ordered you won't have an oven to cook with for the holidays,after what i've seen i will never self clean my oven again with the self clean feature i use easy off just as good.hope this helps you out and merry christmas

COPY AND PASTE THIS AND IT WILL TAKE YOU THE SIEMENS DOCUMENT SITE FOR FREE DOWNLOADS http://www.siemens-home.bsh-group.com/uk/customer-service/user-manuals

Try replacing the temperature probe that sticks into the oven, that is the likely cause.

Your manual should show you how to remove the door from the oven and also how to separate the glass panels to assist cleaning. If you do not have your manual, use the link to download a PDF copy of it. You will need the ENr from the rating platehttps://portal.bsh-partner.com/portal(bD1kZSZjPTAwOQ==)/PORTALFRAME.HTM

Is there a stove on top. If so, you may have water dripping from the top down into the area just above the oven. Does this moisture form when cooking or is it present all the time.

Ik heb net een soortgelijk iets gehad met mijn siemens oven. Ik kon de glasruit vinden bij europart. Jou oven is hier te vinden: http://www.europart.nl/siemens/hb24058eu-slash-01-id-346228Maar je ruit staat er niet bij. Je **** gelukkig contact met ze opnemen en kijken of ze hem alsnog kunnen bestellen:http://www.europart.nl/offerte_aanvragen/ Grt. Wim

Hi

You can buy the parts from this link or from this link. Hope this helps...please post back for further assistance.

Daniel

Hi,
Leave the oven, allow it cool before attempting to open the door. You might have to leave it for hours.
The oven door lock needs approximately 1 hour to cool down before the oven door can be opened after a self cleaning cycle has finished. If the lock does not open after the oven has cooled down, you can try....1) Unplugging the oven or shut off the circuit breaker for 5 minutes.
Plug the oven back in or turn on the circuit breaker. Set the clock and try moving the door lock lever or opening the door. Gently try moving the door lock lever or opening the door.
Most rovens today use 3 different types of door locks...one is a solenoid controlled lock ( you hear a loud buzz noise when setting or unlocking the lock and has a arm that you must move to set the lock )...another is a heat sensitive lock ( has a arm that you must move to lock and un-lock, makes no noises and has a spring that slowly moves to lock the door will the oven is heating up )...Some locks are motorized ( no handle to move, the motor locks the door by it's self when you set the oven for self clean )... If the motorized and heat sensitive locks fails to open after the self clean cycle, you must access the lock and move it yourself to open the door.
On the free standing ranges, most times you must lift the cook top to access the lock mechanism. On built in ovens, the oven must be pulled out to remove the top access panel to get at the lock mechanism. Some build in ovens can have the control console removed to access the lock system. On the heat sensitive style of lock, there are no electrical parts to operate the lock, usually you will need to replace the lock. On the motorized style of lock, you will have to use a ohm/volt meter to test why the motor will not work. On the solenoid style of lock, the solenoid is often mounted on the back of the range and can be accessed by removing the rear panel, some may be mounted at the front, such as in a built in oven. The failure of the solenoid style of lock is normally caused by a bad lock solenoid. In order to get your door open, you must operate the door latch mechanism manually. Unplug or remove power from the range. Take the rear cover off the range. Locate the door latch assembly and operate it manually and open your door. Then check continuity of the solenoid. Some of the latch assemblies have micro switches to supply power also. You may need to check them. You should be able to get the door open and use your range until you can get a tech to repair if you can not repair yourself.

And you can use this link to seethe types of errors and what they mean.
To view the error codes interpretation click here: http://www.repairclinic.com/Fault-Codes
Take care.