Siemens SpeedStream - Answered Questions & Fixed Issues

http://www.portforward.com/english/routers/port_forwarding/Siemens/Speedstream-5450/World_of_Warcraft.htm should be close enough to get you started (they don't have pictures for the 4200). Check the link for the downloader too - you'll need those ports forwarded if you want to download upgrades. (And you probably can't get both the desktop and the laptop playing at the same time - a port can only be forwarded to one computer at a time.)

First I would open Internet Options in the Control Panel, click on the Connections tab, click LAN Settings and deselect everything that is checked. If you still can't go to a site, try Google Chrome or any other browser to see if they work. It could also be that you have Limited Connectivity. Click Network and Internet Settings and see if check your status there. To reply, please click the Comment button.

Why not leave the modem and router connected and connect the Laptop to the router by wireless.

try installing iobit advanced systemcare free software and run drive booster

For simple setup instructions, go here: https://www.att.com/esupport/article.html#!/smb-internet/KM1189747 For more detailed setup instructions, go here: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&cad=rja&uact=8&ved=0ahUKEwiD9oOZg5DYAhXmy4MKHaaMA2oQFghAMAQ&url=http%3A%2F%2Fwww.finestplanet.com%2Fdownloads%2FSS4100install.pdf&usg=AOvVaw3UU1BKiwxaBLxLLwlwyEnV Actually, you will not find a driver on Siemens driver website because according to Siemens, the 4100 Ethernet model works with any Ethernet equipped PC, regardless of operating system. Just ipconfig in command prompt and you will get the default gateway and you can actually get the config page to configure the same. Good luck.

This router is designed to be connected to your computer . Your drives are also connected to your computer. But you can set up a LAN to access your other computers and/ or drives on a network

plug the computer into the modem testing dhcp if it gets internet the modem is the dhcp server the plug into router by itself disconnected it from modem testing dhcp if gets ip address and no internet it's the dhcp server dhcp can be done by the modem or router. I bridged mode the modem and let the router do dhcp. of course the router must be pppoe for dsl. been years since I had DSL, hope it helps

When you are connecting to it, are you using the lan connection straight into the device? When you do that is it showing as at least connected to the device on the computer? You did not post the operating system but can you check the router address by using the command prompt and using tracert commands to see what it is listed as? If you are using windows 10 have you use the powershell command to reset the winsock? Did you use the 30 30 30 reset method on the device?

To find out youre internet speed;
www.speedtest.net
(make sure you dont have any applications that use youre internet. this is to get the correct speed)

You can set a limit for what the torrent can download for.

Right click it and find out how
(i dont know what client you use)

You posted your password and username. Anybody can take the details and use your account. Ask Fixya to remove it for your own good. http://www.fixya.com/contact

To answer you, try putting in browser 10.1.1.1 see if you can get to the modem's menu.

you need the cd... id call who ever your providor is

Does Big Pond and your new ISP dodo use the same values for VPI/VCI?

If not, you need the correct VPI/VCI for your new ISP.

Read the FAQ at DSL Reports on the 5260 and changing the VPI/VCI using EnterNet 300 1.5b or EnterNet 300 1.5c.

http://www.dslreports.com/faq/15476

Regards,

Doctor Olds

i m sorry to say that enternet300 1.5c is not available these days in online.

instead of enternet , windows xp has a similar built in interface, its 99% similar to enternet

try configurin your isp using this simple procedure, configuring this interface is pretty easy compared to enternet.

so go ahead and give a try . i m sure u wont regret !

•Go to Start->Control Panel •Then Network & Internet Connections
•Then Network Connections
•Select Create a new Connection
•Click Next
•Select Connect to the Internet then click Next
•Select Set up my connection manually then click Next
•Select Connect using a broadband connection that requires a user name and password then click Next
•Type in your ISP's name then click Next (**See Note Below)
•Enter your user name as provided by your ISP. 

for example: You might need to inlude your domain as part of your username. [email protected]


•Enter your password, then confirm it

•Select Use this account name 
•Select Make this the default Internet connection then click Next
•Select Add a shortcut to this connection to your desktop then click Next
•Hit Connect


i guess this must resolve your issue :)

Very vague question. Cannot understand a bit? Question should be in detail.

You may have to reset the modem. Hopefully you have all the details on hand for your broadband account available? That way once the details are in you can set the administrative password to whatever you wish. But write it down & put it somewhere safe. :)

try to surf in safe-mode with networking. when it works, something block you..may be the antivirus have a security firewall or not correctly configured.

Go to http://www.google.com and type "Siemens SpeedStream Modem 4100 manual". It is available in PDF file.

your internet may be slow due to following reasons - Your ISP (internet service provider) may be having issues with routing signals to you.- Your browser memory cache is so full, your browser has to slow down to allow for its limited hard drive space.- You might have spyware/malware infecting your machine, and secretly using your Internet bandwidth.So You need to optimize browsers and internet connection. - First of all update the browser - Disabling The Firewall- Remove unwanted tool-bars and plug-ins - clear temp files- Deactivate background running servicesIf you are unable to perform above tasks then use a single utility tool like PC Fresher that will not only fix windows errors but will also optimize Internet.

1. Connect your modem with bsnl line.2. Connect modem to your computer/laptop using LAN wire3. Power ON your modem4. Open Internet explorer5. Type 192.168.254.254 in address bar and click on enter button6. enter user name as admin and password also as admin. If it not accepts, then reset your router by pressing reset button available in the bottom in hole. Press for 30 seconds7. after log-in click on ISP Connections.8. Click on advanced settings9. Click on Configure the ATM Virtual Circuit10. Delete the existing entries11. Click on Add a new VC12. Enter VPI=0 to VCI=3513. Select protocol as PPPoE14. Select the PPPoE Configuration as 'with PPPoE Bridge'15. Click next button utill page comes for user name password, enter your login details16. Click on Finish button17. Reboot router.That's it, You are done

Hi,

* You dont need any special drivers to install modem.
* Open up internet explorer, type 192.168.0.1 in the address bar and press enter key.
* Now you should see the configuration page of modem.
* On the left side, click on Advanced button, below that, you will see "connection configuration" option - click on it.

*** If it asks for modem access code anywhere, you can find the code underneath the modem. please type it ***

* Under this page, you have to enter the email address in username field and password, change the connection type to smart keep alive, click on save changes

* Now it may ask you for restart modem. click on restart. within 1 min, you will be connected to internet.

Take care