Sears LiftMaster - Answered Questions & Fixed Issues
I have a Chamberlain LiftMaster Formula 1 garage door opener that will travel cycle a short distance and then stop. Light on the back of the opener blinks 5 times. Do I need a new circuit board or is
Hi,
If you haven't already make sure the track and door are aligned and nothing is blocking. Can you hear it struggling to move or does it make any unusual noises, listen carefully. Pull the release leaver and see if it is easy to move the door by hand, does it get stuck or is it harder to move in certain parts. Clean the track and any contacts making sure that there is nothing blocking the sensors. Try operating the door when it is dark or nearly dark to see if light is interfering with sensors. Also make sure sensors are aligned if you can. Feel the the motor unit and see if it is hot, if it is unplug power and check for obstructions. Avoid repeated attempts resulting in a hot motor let it rest for 30 minutes before the next try.
If all else fails contact the supplier with the model number and give them the error code i.e. light flashes 5 times. Although some of these can be pretty vague like "call a service agent" etc.
- Ben
BRIGGS AND STRATTON MODEL #
diaghram on the side of the carb facing towards muffler 4 screws when you take them out be careful there is a diaghram you replace, spring saver, and spring make sure they go back in the same order, whenever these engines or any horizontal with pulsa jet carb doesnt start it is usually because of diaghram I ran alcohol go karts and you have to drain the alcohol after you are done running karts and they will eat them up quicker than normal gasoline
6/25/2011 10:47:07 PM •
Sears Home...
•
Answered
on Jun 25, 2011
•
1,167 views
I have a Sears Craftsman
Depending on how old your Remote Control Smart 3 Function remote is determines on how to access the battery compartment. It will either have a small screw which needs to be loosened or if it doesn't have that, it will pop open when a very small, thin, flat blade screw driver is inserted in the side seam of the plastic housing. It's going to be tight, so be gentle with it. Once you access the wafer battery, note which side is up (+ or -). That's the way you want to install the new battery.
Hope this helps you out.
What are the 2 round
The 2 round buttons allow you to operate additional garage doors or other compatible devices such as remote lights etc
My doorbell has gone quiet
It may have this silent option in either choice for volume or melody. My doorbell has numbered buttons that need to be pressed together with the button to open the door, in order to access these functions.
Another thought is that a battery needs to be replaced.
2/10/2024 4:57:34 AM •
Home Security
•
Answered
on Feb 10, 2024
•
24 views
Not finding what you are looking for?