Sceptre Televison & Video - Page 3 - Recent Questions, Troubleshooting & Support

www.sceptre.com/faqs.html

Try a reset to this set, and check. If it do not help you, the main board to it is faulty. Contact the authorized service centre. There are two types of reset to TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Bad IR and bad board recommend replacing

take batterys out put bk in

Do you have an outside antenna? If so start scanning for individual channels at 000. Move 5 degrees scan for individual channels again. Move 5 degrees more. You must scan for individual channels. A wide range scan will erase everything else. Go to Menu. Hit 7343 then mute. This should take you to a menu with a single scan option. It will take a very long time to complete this. Once you have scanned in every direction, be sure to NEVER hit the wide scan.

The first 50% of the scan is digital. The second 50% is analog. Unfortunately, you can't turn of the analog scanning or ask for only digital. If you are using an antenna be sure that it is aimed in the location that will provide the most channels. If you are using an antenna, you may be able to scan for channels individually. You will have to turn the antenna 5degrees at a time and then scan for individual channels. If you do a wide range scan, all channels previously found will be erased.

http://www.fixya.com/support/t13797056-sceptre_tv_no_sound_but_picture https://www.diyforums.net/no-sound-on-sceptre-134351.html

Take a look at this

• Region 1: U.S., U.S. Territories, Canada, and Bermuda.
• Region 2: Japan, Europe, South Africa, and the Middle East, including Egypt.
• Region 3: Southeast Asia, East Asia, including Hong Kong.
• Region 4: Australia, New Zealand, Pacific Islands, Central America, South America, and the Caribbean.

there are limitations to how many times you can change a region so your change might be for good but anything is possible so read this https://www.wisebread.com/make-your-dvd-player-region-free-in-seconds also check this http://www.sceptre.com/pub/Manuals/LED/E325BD-HD-12222011.pdf and this http://www.sceptre.com/pub/Manuals/LED/E325BD-HD-12222011.pdf https://www.6ya.com/mr.mike

That unit uses a standard connection for the country you are in. You just screw it or press it on. The user manual is here: http://www.sceptre.com/pub/Manuals/LEDHDTV/X322BV-SR-User%20Manual.pdf

If you select "source" on your remote then enter 7343 it will bring up a factory menu. Go down to 'Other setting' , the setting 'scaler output' should be set to "Normal". This setting flips the display.

My sceptre tv just started randomly changing through input modes, sometimes once or twice before stopping and sometimes it continues