Samsung Dishwashers - Recent Questions, Troubleshooting & Support

The Delicate light flashing on Samsung dishwashers indicates a drain error. Possibly a pump/motor assy.
Samsung Dishwasher Not Draining

Doesn't sound like a clogged ECS because it's not draining at all.

Samsung... | Answered on Nov 28, 2019

Disconnect the power cord from the outlet and wait for about 2 minutes. Plug the power cord in again. The computer board will probably reset itself, anf there should no longer be a problem

Samsung... | Answered on Sep 29, 2019

Not all dishwashers have a heating element so the dishes will not completely dry especially plastic dishes.

Samsung... | Answered on Sep 12, 2019

If it says there is a leak, then there is one. Water leaks into a sealed tray in the base of the machine and that is where the safety switch is. You never see water on the floor because it is contained. See the videos

How To Fix Samsung Dishwasher with LC Error Code - YouTube
9k=? 3:43 Nov 12, 2017 - Uploaded by How To Fix It Workshop In this video I describe why my Samsung dishwasher has the LC error code and how I remove the bottom ...

Samsung dishwasher LC error code fix/reset - YouTube
z? 3:52 Oct 18, 2017 - Uploaded by Mike Barber How I fixed my LC error code. ... Samsung dishwasher LC error code fix/reset. Mike Barber. Loading ...

Samsung LC Leak Error Clear - YouTube

Samsung... | Answered on Sep 06, 2019

Dishwasher Heavy Error Code Repair Samsung - YouTube

? 2:24
Aug 14, 2014 - Uploaded by JoeBrownToolGuy
Dishwasher error code "Heavy" flashing light. Samsung Model DMT400. Video shows what you need to do ...

Samsung... | Answered on Sep 04, 2019

Mine make a grinding noise also when the wash cycle starts. I had a repair guy over fixing my fridge and he said it was the washer motor. My machine has only been in use for 1-2 yrs. Other owners say that the tabs on the top rack break off and get lodged in the machine. hope this helps a little.

Samsung DMR77LHS... | Answered on Aug 28, 2019

Had a look in the user manual for your dishwasher.

Page 26 shows blinking Heavy light means there is leakage in the dishwasher. Most likely there is water in the base under the drain sump which could cause the flood switch to trip. Turn mains power to dishwasher off. Pull it out from under kitchen bench without breaking the hoses. Put some towels on the floor and turn dishwasher back and forth on incline to get water out. Wait a little and turn on. If no difference then you need to dry the base and find the source of the leak. More likely the door seal.

Samsung... | Answered on Aug 21, 2019

The arm may be damaged or defective.

Samsung... | Answered on Aug 15, 2019

The Normal, Heavy and Smart lights will blink when there is low water level in the dishwasher. Check that the sump area isn't blocked from filling with water. Often there is a float inside the tub that can be held down by a utensil that fell under the lower basket. Remove any foreign objects. Then try to run the dishwasher when it is completely empty. The parts diagram for the dishwasher is available here: . If there isn't an obvious blockage in the water level monitors, you could have a wiring problem or an issue with the control board that doesn't get the signal for water reaching the desired level. (Note: if the incoming water pressure were too low, only the Smart light would flash.)

The manual for the DW7933LRABB is available from Sears Parts Direct on the product page: . The current link to the manual is .

I hope this helps.

Cindy Wells

Samsung... | Answered on Aug 05, 2019

Not finding what you are looking for?
Samsung Logo

1,349 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Dishwashers Experts


Level 3 Expert

1234 Answers

Cindy Wells

Level 3 Expert

6049 Answers


Level 3 Expert

85216 Answers

Are you a Samsung Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides