RCA Televison & Video - Page 8 - Popular Questions, Answers, Tips & Manuals

If your RCA remote control is compatible, the code(s) will be found there.

Check the on/off button, could be faulty.

1. Open internal fuse 2. Power supply failure

I doubt you will physically damage the machine as the inputs/outputs are likely decoupled but some digital equipment that is mostly computer is rather vulnerable to becoming "confused" and sometimes terminally so... While you probably won't damage the machine and it will cope with providing two outputs, there are no guarantees...

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. https://electronicshelponline.blogspot.com/ https://elektrotricks.blogspot.com/ https://electrohelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given. If blinks continue without any pause, the main board is faulty. Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

I don't know much about these things but I am guessing the tv doesn't have an in-built cable decoder and a suitable set-top decoder will be needed as an interface.

Use code search on your GE URC to find something that works. If a search through all codes stored in the URC fails, try a different one.

Search files for your tv model copy to flash drive and flash your tv needs a software restore or update

Look on the manufacturers web site and you may find one.

That does not appear to be the correct number that you typed. Using the photo I got the correct model number, The issue appears to be the power supply board. The usual suppliers that I recommend dont have it in stock. There are some on EBAY though. They are about 50 dollars. As always without actually testing the unit with the proper gear, it is hard to say what the issue is.

Hi there!! Try this: Step 1 Turn the component, like a TV set, on. Step 2 Hold down the "Code Search" key on the SystemLink 3 remote until the light that's on the remote turns on. Keep holding the button after the light turns on. Step 3 Press the device button ("TV" button) at the top of the RCA remote. Then, release both buttons. Step 4 Press "Off/On" repeatedly as the remote browses through available codes. Continue doing this until the component shuts off. Press "Enter" to save the code. Good Luck! Mr.Mike

Internet search produced lots of user manuals but not much else apart from a short YouTube film. Modern switch mode power supplies can be tricky to diagnose as many are intelligent; necessary to reduce the risk of fire. They monitor the current drawn by circuits and will shut down if it exceeds limitation. Some power supplies will not even produce power unless it "sees" a load. Whether this applies to your power supply or not I can't comment about. https://www.youtube.com/watch?v=z89Bnev0p7s

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent. View the site by desktop or web view on mobile devices to see the "search box". Type in the brand name of your set in search box; to get gathered the related posts.

It depends on the TV. Does the TV have a digital audio output? Is this an optical or coaxial output? (Most Smart TVs do not have an analog audio output (headphone jack or RCA).) You will need the appropriate digital audio cable and a converter with the digital audio input and analog audio output. See https://www.amazon.com/DA-Converters/b?ie=UTF8&node=3224445011 for a few choices. Most of the converters do not come with the cables. This model with mostly positive reviews, https://www.amazon.com/Digital-Analog-Converter-Coaxial-Toslink/dp/B07LF82S95/ref=lp_3224445011_1_23/135-5511214-2912559?s=aht&ie=UTF8&qid=1591372740&sr=1-23 , has both the optical and the coaxial digital audio inputs. It also includes the cables for the digital audio. I hope this helps. Cindy Wells

Use your remote, go to settings then to mirror turn it on or off

https://www.youtube.com/watch?v=AfyRPh364Pg https://www.youtube.com/watch?v=CnFfo8-3GC4 https://voxxintl.zendesk.com/hc/en-us/articles/225345867-Programming-the-RCA-RCR314WR-or-RCR314WZ-Remote-Control

Try these codes. [1294, 1285, 2106, 2176]. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box. http://electro-medical.blogspot.com/ http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/ http://electronicshelponline.blogspot.com/

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ Blinking codes details of many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty. View the site by desktop or webview on mobile devices to see the "search box". Type in the brand name of your set in search box; to get gathered the related posts..

https://www.youtube.com/watch?v=6agKqMs1Cms https://www.youtube.com/watch?v=DVRrImK-C5I

https://www.shopjimmy.com/rca-re46zn1332-power-supply-led-board.htm