RC Toys - Recent Questions, Troubleshooting & Support

Question edited for clarity. Question moved from Television and Video category. It may be tail heavy, so it goes into a steep climb turns part of a loop and stalls. It should balance in the centre yoke of the wing. Or the control surfaces and not set correctly. Join an RC Club https://www.google.com/search?q=foamboard+planes ..

You might try contacting these guys. https://www.skytechhelicopter.com/parts-for-turbofrog-rc-helicopter The TF-1 model is similar and you might inquire about a guide for that if your primary inquiry doesn't yield a result.

I noticed that there is a hidden screw holder inside the front of both large front windows.

is motor engaging the prop --plastic gears damaged /worn---weak batteries--freq--problem

Hi
This type of helicopter uses a fixed pitch blade. Have you recently replaced one or all the blades? If the blades are correctly positioned then once the motor comes to speed, the pitch of the blade creates enough lift to overcome the force of gravity. The problem you're having can only be that the motor is not coming to speed or the blades have been replaced but the pitch is now at the wrong angle.

https://www.youtube.com/watch?v=GZQMX1NkDlc This involves repair of an RC toy car. .https://www.rcscrapyard.net/maisto-rock-crawler.htm Go to Shapeways dot com and search for Maisto parts. Some 3D printed replacements. Below is an example of a warranty for a Cobra RC toy. You would have to try googling the maker of your RC toy and include the word warranty. https://www.cobratoys.com/Articles.asp?ID=265

I have the same problem, did you find out the answer?

Question edited for clarity. The manual is here Frank https://manualzz.com/doc/63028438/interactive-toy-concepts-qe8514xxtx27-boydcoddington-r-c-... https://www.google.com/search?q=boydster+ll+rc+car ..

Hi and welcome to FixYa. I am Kelly

The L screw is adjusted when your having problems accelerating from idle..i.e sluggisgh acceleration or stalls.

The H screw is adusted at MAX rpm only to get the fastest engine speed. You may have to make minor adjustments on the L screw after adjusting the H screw to smooth out acceleration from idle to MAX speed so that you do not have stalls or sluggish acceleration.

There is one major NO NO when making carb adjustments... NEVER screw the jets tightly closed. The jet tips will jam into the carb body and twist off. If you ever have to close the jets completely... ligtly close them.

Thanks for choosing FixYa,
Kelly

You can't change their frequency, you have to but a car with them designated, black ones a 47 and red/blue are there 26 or whaterver.

You have mistakenly posted a question on FIXYA concerning a purchase you made. FIXYA does not sell merchandise. Consider asking a trusted relative or close friend to help you find out who to contact concerning your merchandise return issue.

The <a href="http://lightake.com/products.do/category.Wholesale_RC_Aeroplanes_Aircrafts-424">RC Airplanes</a> task process views for really wonderful. It through many useful information gather from here! I have like this site.

I am not sure this is the switch you are looking for. You can search a website by going to Google, then in the searchbox, type site:www.thewebsiteaddress.com switch Of course, you use the actual website address. It will search the website for pages with the word "switch" on it. Here is the switch I found: http://www.rchelicopterpart.com/23-rc-car-parts?p=3 The following group might be of some help: https://www.helifreak.com/showthread.php?t=665738 It is possible that you might have to search for a used item to use for parts. For example at a site like: https://www.terapeak.com/worth/mix-lot-of-3-skyrover-exploiter-remote-control-helicopter-rc-for-parts-or-repair/222043300573/ https://jet.com/product/SkyRover-Phoenix-Outdoor-RC-HELICOPTER-4-Channel-Remote-Control-HELICOPTER/b72d14d82fe84b0caf3493b9ce8eea64 You might contact the business below and they may be able to help with that part: https://www.rc-helicopter-spare-parts-online.com/

maximum 4 hours...

The track worked great for the first month and my son loved it. Then one controller went bad and wouldn't supply any power to the track when the trick was pressed. Then other sections of the track started loosing power for some reason. This makes the entire track completely un-usable as the cars can get enough power to go around the loop.. All the railing constantly fall off and you have to re-attach it. This is very cheap quality and I am disappointed.

http://www.protocolny.com/instruction_manuals/rc/6182-2j-predator-sb-im.pdf

https://circuitdigest.com/article/servo-motor-basics

You can use any size Mah but the voltage must be the same.

try runryder

Contact a seller on Amazon and offer to purchase a copy of the instructions. https://www.amazon.com/NKOK-Banditz-Hyperspeed-Remote-Control/dp/B00EVAB0C2 https://www.amazon.com/NKOK-Banditz-Hyperspeed-Remote-Control/dp/B00EVAB0C2