Proscan Tablets & eReaders - Page 6 - Recent Questions, Troubleshooting & Support
I don't have sound even if the volume is max
Have you entered to Setting-Sound to check.
If so, and if that does not work, try with headphones.
If still does not work, try Setting-Reset to factory (you will losse everything so backup it)
If does not work... the unit is damaged
The tablet is not staying charge and I find that's the problem is inside the whole where you put the charger
Usually it is.. this equipment is a very low quality Chinese one. I solved using a different connector from one universal Targus power supply for laptops. But it could cost you more than buying a new tablet. However, if you need to extract some info from it and you don 't want to use an additional power supply, there is a way to put a tiny aluminum band paper around the plug to press the contact inside. That will last while you don't pull the plug again... very impractical but only for emergency.
My proscan tablet is locket and ican't unlocket it what can i do???
Since I don't know which exact Proscan Tablet you have, here is how to restore the PLT9045K.
1) Make sure the tablet is powered down.
2) Press and hold VOLUME UP(+) and DOWN(-) buttons, plus POWER button all at the same time.
3) Insert a metal pin in the RESET hole at the back of the tablet, then push and hold it for 2 seconds, while still holding the VOLUME and POWER buttons. Make sure the pin is pushed. It seems like nothing happened, but just keep on going to the next step.
4) Power ON the tablet and immediately, PRESS and RELEASE continuously the VOLUME UP(+) button in order to get the display as showing dead tablet (dead robot).
5) This is the critical part. Make sure you do the right sequence or you will start again from the beginning. Press and hold the POWER button, then press and release VOLUME UP(+), and the display will give you a screen showing different options.
6) Choose the option wipe data/factory reset, by clicking POWER button to scroll down. To execute the selected option, press VOLUME UP(+) button. The tablet will reboot back to its factory setting.
Not finding what you are looking for?