Peugeot Logo

Peugeot Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 401 Products
  • 26K Answers

check the cv joints for torn boots and wear

Peugeot Cars &... | Answered on Jan 14, 2020

If you have found the fuse box then you can visually identify it. If you take a new fuse you will see a small piece of metal connected in a U shape. When the metal is broken then it is bad. It may be accompanied by a slight burn mark as well.

Peugeot Cars &... | Answered on Dec 17, 2019

There should be a button on the lower part of the centre console on the same line as the hazard button. It will be on the left side marked with a padlock symbol. The doors will only stay locked as long as you don't open a door to get out. This will reset the locks to the 'open' position.
If this is the button that isn't working check if the key remote works. If both don't work check the fuses and the battery in your key remote. (A common fault).

Peugeot Cars &... | Answered on Dec 16, 2019

Yes it can be fixed but what to recommend first is a problem. I appreciate the information you provided but it is not enough to provide you with an accurate solution. This current fault could be caused by a number of possibilities. 02 Sensor, Camshaft Position Sensor, Fuel Pressure, Cylinder Compression, CAT, MAF, Vacuum Leak, Misfire or Other Related Ignition Failure. If the car arrived at my shop I would perform a preliminary check. Look for an Engine Light. Pull Codes and look at some live data. Look under the hood for and problems. How does the wiring look? Any strange or bad smells? How does the engine sound? How about the engine oil? Is it over due? How is the level? Preventive maintenance will adversely affect the life and performance of all vehicles. Depending on how you want to proceed. I would as you to look around and gather as much diagnostic information as you can. I can not promise that I can help you but I may be able to. You are the eyes and ears. Please write back, tell me everything that you noticed and found and I will do my best.

Peugeot Cars &... | Answered on Dec 16, 2019

Try , it's very helpful in repairing your vehicle

Peugeot Cars &... | Answered on Dec 14, 2019

The gearbox adjusts when it changes gear to match the way you drive. If you are heavy footed It will change gear at a different rev level compared to a gentle driving method. Some models have a "Cheat" where you can reset the gearbox using the pedals and ignition in a set order. Unfortunately I don't.know the sequence for Peugeot gearboxes.
The 'Heavy on the Gas' idea applies to both manual and auto gearboxes.

Peugeot Cars &... | Answered on Nov 29, 2019

Some vehicles hve to bejacked up when bleed may have air in system still.Renaults few these vehicles can be hard to get air out sonetimes.I suggest you talk to your mechanic

Peugeot Cars &... | Answered on Nov 29, 2019

Found a quick break down on a youtube video
Peugeot 3008 Rear light

Peugeot Cars &... | Answered on Nov 28, 2019

Hi, Anonymous and the usual suspects are:
1. Dirty or clogged air filter.
2. Faulty spark plug.
3. Bad Gas.
4. Improper oil level.
5. Improper chain adjustment and lubrication.
6. Low tire pressure.
7. Dirty or contaminated carburetor needs cleaning and tuning.
8. Broken carburetor spring.
9. Carburetor spring on backwards.
10. Vacuum leak on carburetor or intake boot.
11. Too much slack in the throttle cable
12. Clogged or faulty fuel pump filter or injectors.
13. Faulty pressure regulator.
14. Improper valve adjustment.
15. Slipping clutch.
16. Improper timing.
17. Low compression.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.

2010 Peugeot... | Answered on Nov 13, 2019

Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Peugeot, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.

2007 Peugeot... | Answered on Nov 13, 2019

Very possible that it is coil pac also could be injector on 3 have it checked will cause problem with over fueling & reving

Peugeot Cars &... | Answered on Oct 29, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1991 Peugeot 405
1991 Peugeot 405

441 Questions

1990 Peugeot 405
1990 Peugeot 405

103 Questions

1999 Peugeot 406
1999 Peugeot 406

79 Questions

1999 Peugeot 206
1999 Peugeot 206

55 Questions

Top Peugeot Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6103 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Vernon Taylor

Level 3 Expert

6030 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides