Panasonic Lands Phones - Page 9 - Recent Questions, Troubleshooting & Support
Panasonic corded/cordless phone KX-TG9392T need the IMEI number
The Panasonic KX-TG9392T is a land line phone system; it's support page is available here:
https://shop.panasonic.com/support-only/KX-TG9392T.html . IMEI (International Mobile Equipment Identity) numbers apply to mobile phones. Thus there is no such number for a corded/cordless land line phone. There is a FCC registration for the cordless (radio) transmitter in the phone system. That number simply proves that the company tested the phone to ensure it does not cause interference with other radio frequencies beyond those it is supposed to use.
I hope this helps.
Cindy Wells
Line 1 stopped ringing. The
To program the ringing on the cordless handsets:
1 Press {MENU}.
2 Scroll to “Ringer setting” by
pressing {V} or {^}, then press .
3 Scroll to “Ringer volume” by pressing
{V} or {^}, then press .
L The current volume is displayed.
4 Press {V} or {^} to set the volume.
L Each time you press {V} or {^}, the
volume will alter and the chosen volume
will sound.
L To turn the ringer off, press {V}
repeatedly until “Ringer off?” is
displayed.
5 Press .
L Confirmation tone is heard.
12/3/2020 9:35:23 PM •
Panasonic...
•
Answered
on Dec 03, 2020
Model KX-T7730. Why isn't it working?
How to set date & time for panasonic KX-T7730 Propietary Telephon for more information visit us www.panasonic.jayaperkasa.com/date-time-panasonic-kx-tes824/
I want to block a scam caller.
How to Block Calls With a Panasonic Phone System
- Press the "Menu" key on any of the Panasonic phone system's handsets.
- Press the "#" key.
- Press "217" on the numbers keypad. ...
- Press the button corresponding to the Add option in the phone's digital display.
- Type the phone number to block, including the area code, using the keypad.
More items...
•
Feb 9, 2017
The problem is that the numbers are often spoofed (forged by software) to be local to you. They change every day.
11/10/2020 4:48:08 PM •
Panasonic...
•
Answered
on Nov 10, 2020
How do I return my Panasonic KX-T7630 to its default settings.
I cannot get it to stop forwarding calls to my mobile
Based on the documentation for the KX-T76XX phones, you can cancel the Call Forwarding by picking up the handset of your KX-T7630. Then press the FWD/DND button. Next press 0 to cancel all call forwarding. See page 17 of the manual here:
https://www.ask-tsc.com/pdf/KX-T76xx.pdf . (You can also select to cancel call forwarding for external or internal incoming calls separately, if needed.)
If pressing 0 does not work, did you lock the extension? See page 18 for information on unlocking the extension. If that fails, contact your phone system administration. As far as I know, there is no global reset option available to users of an extension.
I hope this helps.
Cindy Wells
How do I divert calls from Console to mobile KX-T7636
Press the Program button. enter 50 for call forwarding and press Enter. enter 2 and the number (ie 25551234) to forward ALL calls to the specified number. enter 3 and the number to forward when busy, 4 and the number to forward when there is no answer, and 5 and the number for when you're either busy or there is no answer. Hit Enter and then the Program button again.
8/25/2020 1:59:32 AM •
Panasonic...
•
Answered
on Aug 25, 2020
Panasonic kx-tga931T--no link to base reconnect ac adapter
The situation is that a KX-TGA931T reads out "No link to base. Reconnect AC adapter". This is what I saw on one of the used handsets I recently acquired.Unplugging and replugging either AC adapter (base or peripheral) does nothing. But the other otherwise identical handset that recently arrived evidently had different firmware, which more helpfully read out (I may be paraphrasing) "Press Locator button base for 4 seconds, then press OK." This instruction may need just a little elaboration. On the base, the lower right silver button is labeled LOCATOR INTERCOM. On the handset the upper right rubber button may have "OK" on the LCD screen above it, so when it does, it is the OK button. First make sure the base is plugged in and that you have at least a little charge in the handset. Then press that LOCATOR button (for about 4 seconds) until it beeps. It will begin to beep periodically for several cycles. While it is in this beeping mode, press and hold that OK button until it beeps. If you let go too soon, the screen reads "Error!" so just try it again, and wait for the beep. After the beep the screen reads (I may be paraphrasing) "Registering handset." This takes a few seconds. Then it is registered and when you press TALK you'll get a dial tone. Now you don't have to pay $5 for a chat with Panasonic or have to download a manual's PDF (if they even have it) and have your internet search switched to Yahoo. I do not know how many handsets this base will take - now I have 6 registered to it.
8/19/2020 10:57:54 PM •
Panasonic...
•
Answered
on Aug 19, 2020
A bank of blinking leds??
The blinking LEDs means it need to have it's ID reprogrammed. Press the Program button and then the station number (Station 1 or 2 or 3 etc) to store the setting.
Not finding what you are looking for?