Panasonic Office Equipment & Supplies - Page 8 - Recent Questions, Troubleshooting & Support
My panasonic Dp-8020P is giving
u have to short the front door interlock switch as it is not working.it happens in this model quite often.remove the front cover and door .the short the interlock switch with a wire .that's it ,if u can find one then better to replace it.
4/24/2018 3:10:12 PM •
Panasonic...
•
Answered
on Apr 24, 2018
How to clear call for p/m fuser web on a panasonic dp8035
not a great idea seeing that the fuser web is needed to clean the hot-roller, so i would suggest to have an authorised dealer replace the web. if however the web has been replaced , and you just need to clear the counter, this is what to do:get into service mode by pressing and holding the "function", "original size" and "3" buttons in rapid succession. sometime a bit tricky.you should see F1 self test on the screen.if not, press the yellow all clear and try again.once in this is what the manual has to say: "Call for P/M Fuser Web" (Default: 240K)1. Perform the P/M (Preventive Maintenance). Refer to Section 3.3 and 3.4.2. Press the "Function", "Original Size (Ledger/A3)", and "3" keys simultaneously to enter the ServiceMode.3. Enter the password, and select "OK" button (default password is 00000000).4. Enter the Copy Service Mode F5-73 (Fuser web) PM cycle and change to the desired value.5. Press "Function" and "C (CLEAR)" keys simultaneously to exit the Service Mode.hope that helps>mario
4/23/2018 10:48:07 AM •
Panasonic...
•
Answered
on Apr 23, 2018
Not finding what you are looking for?