Panasonic Palmcorder - Recent Questions, Troubleshooting & Support

On the left side of the camera where the little screen is, there is a switch that says tape/card. Put it to tape and then you could record

you definetly have a tape mech fault and this is going to have to go for repairs to panasonic.

Do y'all know how to fix the palmcorder p l425d mine was working until I heard a funny noise then the camera shut off and won't turn on

Did you ever figure out how to do this? I have misplaced the cord to transfer files from the HD to the computer, and I would like to not have to purchase one through Panasonic (Best Buy didn't have one). I just want to transfer the files from the HD to the SD card while in the camera, and then take the card out and put it in the Mac. Any luck?

This error indicates a cassette mechanism malfunction.
It happens usually when you don't operate the camecorder for long time
leaving the cassette inside and the battery attached.
Solution:
1. Open the cassette housing and nock GENTLY with your finger tip
on the cassette cabinet (particularly on the position marked "push") until
the cassette is released.
2. Push on the right place (marked "push") to close and then close the
cassette housing
3. Operate the cassette (play, fast forward/backward).
Repeat the above steps several times until the problem is gone.
Advise: Remove the battery and cassette when leaving the camecorder
for long period without being operated, and store the camcorder in a
dust/humidity protected place.
Hope this can help.

I think the technical term is 'broken'. Take it to a service centre.

Push the - what ? We are all agog to know what you have to push, provided the answer is suitable for family viewing.

call panasonic if there are that many posts maybe it is a recall issue and they should know about it.

Since we do not know where you are, we can offer no advice as to where you could go for repairs. Sorry.