Olympus Audio Players & Recorders - Answered Questions & Fixed Issues

Question edited for a lot more clarity. Question moved from Olympus Camera category. Olympus seems to think it doesn't exist. https://cs.olympus-imaging.jp/en/support/imsg/vtrek/download/manual/ But I see it on Amazon, unless they are Chinese clone copies. The model numbering of 'S-number', doesn't match apart from the 'W-20'. Write to Olympus and ask. https://www.google.com/search?q=olympus+s924+manual ..

It doesn't look like they ever had them. The Firmware link goes to software and there is no Software link.. https://learnandsupport.getolympus.com/support/ws-331m-digital-voice-recorder#section-download-software It is dangerous getting firmware from anyone other than the manufacturer. https://learnandsupport.getolympus.com/support/ws-331m-digital-voice-recorder#section-download-software ..

It sounds like the water damage may have caused the down volume button to malfunction. While it may be possible to fix the button, it would require opening up the device and performing some troubleshooting, which can be difficult if you don't have experience with electronics. I would recommend taking the recorder to a professional repair shop or contacting Olympus customer support to see if they can assist you with repairs. If the device is still under warranty, they may even be able to provide a replacement.

I don't see a current driver for it at this driver guide site. https://www.driverguide.com/driver/download/Olympus-Digital-Voice-Recorder You may try to see if the manufacturer has one. I provide a link to the manufacturer at the bottom; you have to drill down to a chat opportunity from there. I think you are going to have to run the pertinent software in compatibility mode, probably for XP or Windows 7. You could try running the XP driver on an XP machine if you have one collecting dust. That is, if the driver exists in the links at the old posts below. This recorder has been around from at least 2009. Alternatively, you can try the Olympus chat to inquire if a current driver might work on it. I'm under the impression that installation of any driver for the device is a little tricky at the best of times. Here is an old Fixya page from 2009 that hints at such: https://www.fixya.com/support/t2505481-failure_install_olympus_vn_600pc https://www.fixya.com/support/t16043814-need_driver_digital_voice_recorder_vn https://om-digitalsolutions.com/en/directory/americas.html

Send it in for service. Details on the last page. https://www.gov.nl.ca/education/files/k12_evaluation_vn-7200.pdf ..

If you have previously connected the recorder:
1. Make sure the recorder is connected correctly.
2. Open the 'System' control panel: Start menu -> Control Panel -> System.
3. Click the 'Hardware' tab and then click the 'Device Manager' button.
4. Right-click the item that shows as 'Digital Voice Recorder' and choose 'Uninstall' or 'Remove'.
5. Disconnect the recorder.

If you have the software already installed:
1. Open the 'Add / Remove Programs' (Pre-Vista/Windows 7) OR 'Programs and Features' (Vista/Windows 7) control panel: Start menu -> Control Panel -> Add / Remove Programs (Pre-Vista/Windows 7) OR Programs and Features (Vista/Windows 7).
2. Click 'Olympus Digital Wave Player' and choose 'Change / Remove' or 'Uninstall'.

Please restart the computer before reinstalling if you had connected the recorder or installed the software previously.

Digital Wave Player (2.0):
http://www.olympusamerica.com/files/DigitalWavePlayer.zip
SAVE to the desktop
RIGHT CLICK on the DigitalWavePlayer.zip and LEFT CLICK on EXTRACT ALL
CLICK on NEXT, Then NEXT again, Then FINISH
After unzipping the file, click on the SETUP.EXE file to begin installation.
Download update 2.1.4:
http://olympusamerica.com/files/DigitalWavePlayerUpdate214.zip
SAVE to the desktop
RIGHT CLICK on the DigitalWavePlayerUpdate214.zip and LEFT CLICK on EXTRACT ALL
CLICK on NEXT, Then NEXT again, Then FINISH
After extracting the file, click on the SETUP.EXE file to begin installation.

For 64-bit systems, save the driver to the desktop and run the installation within it:
http://www.olympusamerica.com/files/oima_cckb/VNSeries64Driver.zip

If you are sure you have erased all files in all folders then it would not do any harm to run FORMAT from the menu.

This may well clear your "Memory Full" message and get your device working again.

Hope this helps.

not if Olympus or a dealer of them can not get you one

download windows media player for mac from the microsoft website or you may download flip4mac to get the files to play on your mac

I bout the Olympus ws-21os that supports mac but it only supports wma so I had to buy easy wma that converts wma to aiff, wav,m4a or mp3 for $10.00

Purchase a new one. They are inexpensive and liquid damage is sometimes not repairable.

http://learnandsupport.getolympus.com/support/vn-960-pc-digital-voice-recorder#section-download-software https://rianjs.net/2011/01/vn-120pc-vn-240pc-vn-480pc-vn-960pc-vn-2100pc-vn-3100pc-vn-3200pc-vn-4100pc-windows-7-vista

I am looking for these drivers for vista or 7 as well... any luck?????

Hello your foot pedal don't need drivers but you need for sure a transcription software, the pedal will required a program to work together to control your audio files for example you can get a Olympus transcription software that will be compatible with your pedal, at http://www.tvps.com/Products/Olympus-AS-5002-DSS-Player-Pro-Version-5-Transcription-Software---New__OL-AS-5002.aspx or you also can used http://www.tvps.com/Products/Olympus-AS-7002-Pro-ODMS-R6-Transcription-Software---New__OL-AS-7002.aspx

Swapped out the USB cable with a different one and the display showed, "REMOTE". Hope this helps someone out. I've been troubleshooting this on my end for the last two days...

https://www.yumpu.com/en/document/read/49760600/olympus-dm-520-dm-420-digital-portable-voice-recorder-dictation-

You may have to reset the recorder by going to the Device Menu and selecting reset settings. The other option is to attached the device to a computer and use file explorer to browse about the used space and free space of the memory of the recorder. If there is no free space, you need to deleted files. You might try transferring some to a folder on the computer if trying to preserve data. That also might free up enough space on the recorder for it to function again.

Try the set battery option. https://www.youtube.com/watch?v=MGBkXRBYZ7A

It could be full. try clearing some space.