Olympus EVOLT - Recent Questions, Troubleshooting & Support
Can olympus e500 record video?
Yes, the Olympus EVOLT E-500 digital camera is capable of recording video. The camera has the ability to record video in AVI format, at a resolution of 640x480 pixels, and at a frame rate of 30 frames per second. The camera also has a built-in microphone for audio recording.
It's important to note that the video recording function of the Olympus EVOLT E-500 is quite basic and the camera is not designed primarily for video recording, so the quality of the video may not be as good as a dedicated video camera.
Also, the camera firmware is quite old and it may not be compatible with the latest video editing software. It's recommendable to check the software compatibility before recording videos.
Buttons sometimes not responding
Might need to stop by a camera repair shop and ask. Is it possible that your camera is dirty? It might need to be cleaned. Sand, dust, dirt can affect the buttons/controls.
I need to reset an olympus e450 (factory setting)
1. press "menu", navigate to the icon of a camera and the number "1"
2. Nav to the option labeled "CUSTOM RESET SETTING" select the option labeled "reset"
3. Press the "OK" button. when prompted, select the option labeled "yes" and press "OK" to confirm your selection.
Cheers!
Need to factory reset E-Volt 500 Digital Olympus Camera
Put camera dial on P - go to Menu - camera 1 tab is highlighted - right arrow over to card setup - down arrow to custom reset setting - right arrow to reset and press ok - you will see reset yes or no - highlight yes and press ok - camera should now be in factory default settings
Write protect error MSG
Check your camera for broken or bent pins for the CF card.
CF connectors biggest problem are broken or bent pins.
In that case your camera will need repairs. Try substituting a different CF care and see the you get the same problem.
Evolt E500 Olympus - Black / Blank LCD Screen
so u are saying that ur camera is taking pics perfectly but u r unable to see them on lcd but u can see them on PC is that so then ur LCD is faulty offcourse is there any button to toggle lcd on/off if it doesnt help then my dear get it replaced
but if u can see some signs on lcd like info or something then my friend the problem is bigger than u think it is CCD failure
let me know if i can help u in this more and pls do vote me
How do I change the aperture when my camera is in manual mode
You have to hold down the exposure compensation button at the same time as turning the control dial.
The values appear on the control panel screen.
I found this on page 33 of the manual...
Set the mode dial to M and turn the control dial to set the value.
• To set the shutter speed: Turn the control dial.
To set the aperture value:Turn the control dial while holding down the
[+-](exposure compensation) button.
The exposure level indicator appears on the control panel screen, showing the difference (ranging from -3 EV to +3 EV) between the exposure value calculated by the currently selected aperture
and shutter speed compared to the exposure value considered optimum by the camera.
Not finding what you are looking for?