Olympia Lands Phones - Page 3 - Popular Questions, Answers, Tips & Manuals
No Dial Tone to Place Calls
its a battery problem.charge the battery properly without using the phone.if still the same problem the battery needs replacement.as if the battery gets drained internally,it will not get actually charged but on dis-play it will show as charged.so replace the battery if charging the battery does not helps.you can get new battery from
-------
www.radioshack.com
-----
This will help. Thanks please
keep updated.please do rate the solution positively .thank you for
using fixya
Unplug the power to move now the reset buttons are
reset buttons not making good connections...try pushing harder or wiggle the buttons back and forth while pushing down on them...sometimes they make contact that way....if you can get the unit to reset doing that then...have the button assembly cleaned out in the future...good luck
silvio
7/8/2009 4:08:06 PM •
Olympia...
•
576 views • 0 helpful votes
My infor globe does not show the i d caller
for most problews, including caller id, follow these instructions in order:
Put the battery into the battery compartment and connect to the
connectors inside the battery compartment.
Connect the power adapter and telephone cord into matching jacks on the under side
of the base.
Plug the power adapter into the electrical outlet. Plug the telephone cord into the
telephone socket.
my caller id was not working, but everything else was. I followed the instructions above EXACTLY IN ORDER and the caller id is now working.
6/10/2009 4:20:42 AM •
Olympia...
•
852 views • 4 helpful votes
My Olympia cdp 24201 has no sound i called it from
you just need to take the battery out and wait 30 seconds, replace it
and it should be able to find the base. i had this problem and called
olympia and this is the fix they gave me. It's worked for 4 years!
4310-WONT MEMORISE LONG DISTANCE ACCESS CODES ALSO
Hi,
Unfortunately the manual for your product is not available in English, so I can only give you general instructions.
The 16 digits limit is normal and depends on phone specifications. 16 is the maximum size for stored number.
If the number is not being stored , that may happen because you are using a number that the phone does not recognise as valid. Probably this phone does not allow call transfer to this kind of number.
Ensure that you are following thoroughly the instructions, if the phone is not storing settings , then the number entered is not valid.
Test distance access code with a different number.
Also ensure that you are using the phone in the country where the phone was originally purchased, or the phone may not work as it should.
It only light up when i pickup the receiver
Hi,
Just went through the service manual for your product & you have an LCD display unit, this won't go bad overnite this is definately a faulty product... You will have to return/replace the phone .. there is a service tag number at the flip side of your phone ... i am sure you will get the warrenty back with it.
Olympia OL2112 Single-Line Speakerphone:
· Corded Phone
· Single-Line Operation
· 6 Programmable Buttons
· 400 Name/Number Directory
· Digital Full-duplex Speakerphone
· Large 4'' x 2'' Backlit LCD Display.
· Modular Direct Connect Headset Jack
· Message Waiting Indicator
· Conference Calling
· Caller ID
· Mute
· Part #: OL2112
FAME !!
I have a sharper image
Hi,
Just fixed mine tonight. Follow instructions on
http://www.linux-hacker.net/InfoGlobe/for globe removal. I used a .020" feeler guage. The solder joints onthe small circuit board at the end of the arm are subject to vibrationfrom operation and about a bazillion revolutions before failing. You'llneed a good quality soldering iron with a fine tip, some solder wick, abit of patience and a bright light and some reading glasses will nothurt. I removed the solder and then the small board. I'm using an 800degree tip, so with something like that you want to get on/off the padsas fast as reasonably possible so you don't cook it. Then I re-tinnedthe traces and re-soldered the small board onto the end of the arm. Atfirst it didn't want to light up, but on depressing the "Select"button, all was good. Happy to have ol' blue back up and running again:~)
Hope i helped.
Thanks for using "Fixya".
6/23/2009 9:16:41 PM •
Olympia...
•
120 views • 1 helpful votes
External calling rings
I have no idea how it was fixed! I redid some of the menu items to ensure that nothing had been deleted; it is working fine now! Thanks for the support!
How to change time on Olympia Infoglobe caller id
I have the manual and can tell you what it says:
(this worked for me last year when we went off daylight savings, but for some reason, It doesnt seem to work anymore. I can't imagine that I did anything different then. You can try, though.)
Enter (or leave) the Demonstration Mode by pressing the right key for at least 1 second.
Then, by pressing SELECT key, you are SUPPOSED to be able to scan a menu which lets you pick date format, time format, etc.
This no longer works for me, and the instructions also have a contradictory comment that says the SELECT key is disabled in this mode. But perhaps this will work for you.
I would also appreciate instructions if anyone knows what I am doing wrong.
3/8/2009 1:23:36 PM •
Olympia...
•
1,470 views • 8 helpful votes
No illumination.
If the mechanism is not turning at all, hold down the left key to start it.
3/19/2009 2:51:15 PM •
Olympia...
•
872 views • 3 helpful votes
The hand set keeps telling me that there is a
Check With Your phone Company and make sure that they do not have voice mail set up on your phone Also, A short in your telephone connection could be causing this. Make sure that connections are secure on you telephone Jack
Not finding what you are looking for?