Olympia Lands Phones - Page 7 - Recent Questions, Troubleshooting & Support

some of my leds are out.

reset buttons not making good connections...try pushing harder or wiggle the buttons back and forth while pushing down on them...sometimes they make contact that way....if you can get the unit to reset doing that then...have the button assembly cleaned out in the future...good luck

silvio

Buy another one?

http://www.coolest-gadgets.com/20051217/discovery-digital-caller-id-globe-with-clock/

Easy resolve. READ THE OWNERS/OPERATOR manual

Hi, you will not be able to buy it from on-line however you can retrieve a free copy from the olympia, just ring the company up and they will send you a copy (excluding postage)

you can get the manual from retrevo.com, olympia website,

Hi,

Just went through the service manual for your product & you have an LCD display unit, this won't go bad overnite this is definately a faulty product... You will have to return/replace the phone .. there is a service tag number at the flip side of your phone ... i am sure you will get the warrenty back with it.

Olympia OL2112 Single-Line Speakerphone:
· Corded Phone
· Single-Line Operation
· 6 Programmable Buttons
· 400 Name/Number Directory
· Digital Full-duplex Speakerphone
· Large 4'' x 2'' Backlit LCD Display.
· Modular Direct Connect Headset Jack
· Message Waiting Indicator
· Conference Calling
· Caller ID
· Mute
· Part #: OL2112
FAME !!

Hi,

Just fixed mine tonight. Follow instructions on http://www.linux-hacker.net/InfoGlobe/for globe removal. I used a .020" feeler guage. The solder joints onthe small circuit board at the end of the arm are subject to vibrationfrom operation and about a bazillion revolutions before failing. You'llneed a good quality soldering iron with a fine tip, some solder wick, abit of patience and a bright light and some reading glasses will nothurt. I removed the solder and then the small board. I'm using an 800degree tip, so with something like that you want to get on/off the padsas fast as reasonably possible so you don't cook it. Then I re-tinnedthe traces and re-soldered the small board onto the end of the arm. Atfirst it didn't want to light up, but on depressing the "Select"button, all was good. Happy to have ol' blue back up and running again:~)

Hope i helped.

Thanks for using "Fixya".

I have no idea how it was fixed! I redid some of the menu items to ensure that nothing had been deleted; it is working fine now! Thanks for the support!

http://media-server.amazon.com/exec/drm/digital/moleproxy.cgi?name=T2x5bXBpYSBPTCAzMDAwIEluZm9nbG9iZSBNYW51YWw=&file=TUFOVUFMMDAwMDM1MDkxLnBkZg==

click here..

www.smarthome.com/manuals/5109.pdf

1 888 890 8983

1. go to menu, then HS setting, then registration, register
2. follow the steps and register the set to the base.
3.press and hold the base mute button for 10 seconds, press next to continued
4.select the cbs and connect it.
5.enter 0000 as a password

Check With Your phone Company and make sure that they do not have voice mail set up on your phone Also, A short in your telephone connection could be causing this. Make sure that connections are secure on you telephone Jack

Press select key once. CID List shows on globe. Then press dow key to start menu, the first of which is date and time. You can take it from there.

You are possibly in the demonstrate mode. If that is the case, press and hold the right key for a few seconds.

If the mechanism is not turning at all, hold down the left key to start it.

I have the manual in pdf format. Email me at [email protected] and I will send it.