Olympia Lands Phones - Page 6 - Recent Questions, Troubleshooting & Support

Here's a link to the manual to guide you through setup and operation.
http://www.hkwp.com/2006/Olympia/web/uploadFiles/6FF1515BA0BA489C_3915544.pdf

The key sign means that the phone is locked and you must enter a security code to unlock it.

Have you a code?

Yes, Radioshack sells a replacement battery for this phone.

what happens wen my globe does not light anymore ?

Hi, i think the problem is from the circuit board because the solder joint on the small circuit board at the end of the arm are subject to vibration from operation. What you need is a soldering iron, solder wick, bright light and if possible a microscope.
Remove the solder and then the small board using a 800 degree tip so that you can get on/off the pads fast. Re-tin the traces and re-solder the small board onto the end of the arm. Don't be scared if the doesn't come up, just press the 'select' button and it will come up clean and clear.
You can get more information and instructions on this site
linux-hacker.net/infoglobe/

need Olympia PBNext OL2112 manual , can't set the clock ..thanks

Pulse el botón verde, cuando se desea hacer una llamada telefónica pinchie embesi.... leer las instrucciones, en español, faboso

Hi there,

Well you can download the user manual from the below link -

http://www.amytel.net/uploadFiles/D42807F02D7DA0E0_3929103.zip

You can call  866-537-0384 to get the software of your phone.... there is no software release for your phone on internet.

Good Luck!!

Thanks

http://www.amytel.net/download_file.asp?ID=D42807F02D7DA0E0 There you go.. That is the URL for the manual. LOOKING FOR THE SOFTWARE/Driver still !!!!

you just need to take the battery out and wait 30 seconds, replace it and it should be able to find the base. i had this problem and called olympia and this is the fix they gave me. It's worked for 4 years!

I have had luck with www.batteries.com for many obscure battery needs. YOu can also check with FixYa.com advertisers.

Thank you for your interest in FixYa.com

Please vote

thanks,

a

its a battery problem.charge the battery properly without using the phone.if still the same problem the battery needs replacement.as if the battery gets drained internally,it will not get actually charged but on dis-play it will show as charged.so replace the battery if charging the battery does not helps.you can get new battery from -------
www.radioshack.com ----- This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

According to the specifications for this model from the manufacturer there is no mute feature available.

Hi,

Unfortunately the manual for your product is not available in English, so I can only give you general instructions.
The 16 digits limit is normal and depends on phone specifications. 16 is the maximum size for stored number.
If the number is not being stored , that may happen because you are using a number that the phone does not recognise as valid. Probably this phone does not allow call transfer to this kind of number.
Ensure that you are following thoroughly the instructions, if the phone is not storing settings , then the number entered is not valid.
Test distance access code with a different number.

Also ensure that you are using the phone in the country where the phone was originally purchased, or the phone may not work as it should.