NorStar Recent Questions, Troubleshooting Help & Support

to reset the administrator pasword enter feature 985 press 9, at the password prompt enter 73738767793 (resetsmpwsd) and press ok or #,press yes to reset password. password should be defaulted to 0000. then try Feature 983. if your system has 2 digit intercom #s your password is 120000.

Feature #65

You need administrative rights to get into the PBX. Once in there, you can assign which phones receive incoming calls. It has been years since I worked on the meridian system, so I can't tell you the way to do it, but it is in the manual. It's not complicated. You can also set it up for DAY/NIGHT mode so that in the evening, if required, all phones could ring on incoming calls so that anyone in the building can answer them.

Did you check for the volume control and its adjustments? Do you have the setting on "mute?"

You NEED to get SYSTEM documents (Hard Copy or CD) for NORTEL NORSTAR CICS before TAMPERING ...URL posted below... Found on page 24: Default Password Code is "admin" on your phone dial... Done by pressing 23646 on your phone dial... Time feature is accessed by inputting **8463 = (**TIME) Hope this helps... (CAUTION: read & understand BEFORE programming) http://phone.manualsonline.com/manuals/mfg/nortel_networks/compact_ics_61_system_coordinator.html?p=24

PDF]Telephone Features Programming Guide - Avaya Support

https://downloads.avaya.com/css/P8/documents/100142941 AvayaNORTEL NETWORKS is a trademark of Nortel Networks. ... All other trademarks and registered trademarks are the property of their ... One-line and two-line displays . ...Memory buttons . ... Call anomalies for telephones without line buttons . .... Select how you dial your calls . ... Receive a busy signal on an internal call .

Norstar How to program phone how to program voice mail ...

www.phonserv.com/1_PDF_user_guide_meridian_norstar_phone_syste...

Nortel Networks Meridian Norstar How to program voice mail phone feature codes ...Modular ICS KSU must be programmed with an M7310 or a M7324 telephone. ... Lift handset, press Voice Call key or press the Feature button, then press 66 2. .... At the LOG: prompt, enter your mailbox#(extension #. and your password all ...

[PDF]N QRTEL NORSTAR

If you mean for line 3 to be selected when you pick up the handset, you need to program that as the "prime line" for that set.

Set "prime line" to "intercom" in config.

Press Feature 985 - press 9 even when not listed in options. At the password prompt enter 73738767793 and answer the reset password prompt with yes. This will reset the password to default.