Nikon COOLPIX - Answered Questions & Fixed Issues

Reset All Press the d button M z tab M Reset all When Reset is selected, the camera's settings will be restored to their default

Question edited for clarity. Question moved from Cars and Trucks category. Question translated to English. We only speak English on Fixya. New Button board needed. https://www.google.com/search?q=nikon+coolpix+s2500+repair ..

Question edited for full 'make model (what it is)'. Question moved to Model Series category. Take it to a Nikon Service Centre, it will likely be the sensor. https://www.google.com/search?q=nikon+repairs+near+me Others have reported colour balance issue. https://www.google.com/search?q=Nikon+s7000+view+screen+is+a+magenta+color ..

When attempting to install Nikon Capture or PictureProject on certain Windows 98SE systems the following error messages may present themselves: This message is caused by the registry key value for the "SubVersionNumber" on the version of Windows. If the system contains SubVersionNumber "B" Nikon Capture and PictureProject will not install on the system. Below are instructions on how to manually edit the System Registry to change the SubVersionNumber Registry Key to allow for Nikon Capture and Picture Project to install. Manually editing the System Registry requires vigilance and care because a mistake could cause errors with the System. Be extremely careful when editing these keys. Nikon is not responsible for any loss due to problems with registry key editing. To manually edit the System’s Registry: 1) Quit all running applications 2) Click on "Start" then "Run…" Type the following in the run command line: "regedit" 3) Click "OK" and the registry editor will open 4) Click "Edit" from the menu bar and choose "Find" 5) Type "4.10.2222" into the "Find What:" field 6) Click "Find Next" The results will appear in the column on the right. The Version Number will be highlighted. 7) Click on "SubVersionNumber" once. 8) Go to "Edit" on the menu bar and choose "Modify" 9) The current Value data will read B. 10) Change "Value data" to " A" (MAKE SURE THERE IS A SPACE BEFORE THE A) 11) Go to "Registry" in the menu bar and choose "Exit" 12) Confirm the change has taken effect. Right-click on "My Computer", choose "Properties". 13) The version value should reflect "4.10.2222 A" Nikon Capture and Picture Project can now be installed and run on this system.

It sounds like there may be a problem with your Nikon Coolpix 4300 camera that is preventing it from turning on, even when you have a charged battery installed. Here are a few things you could try to troubleshoot the issue:

1. Check the battery contacts: Make sure the battery contacts on both the battery and inside the camera are clean and free of debris. If there is any dirt or corrosion on the contacts, use a clean, dry cloth to gently clean them.
2. Try a different power source: If you're charging the battery using a wall outlet, try using a different outlet or a different charger. If you're charging the battery using a USB cable, try using a different cable or a different USB port.
3. Reset the camera: Sometimes, resetting the camera to its default settings can help resolve software-related issues. Check your camera's user manual for instructions on how to perform a reset.
4. Contact Nikon customer support: If none of these steps resolve the issue, it may be a problem with the camera itself. Contact Nikon customer support or take the camera to a professional repair service for further assistance.

I hope this helps!

Hello again There is one repair place that lists 700 different battery doors, but your is listed and out of stock. AliExpress also lists doors and sometimes they end up on eBay. Your best bet is Nikon direct. https://www.google.com/search?q=replacement+battery+cover+door+for+a+Nikon+Coolpix+s7c ..

Check the manual for instructions on how to set it for the maximum number of megapixels and the best picture quality. If it has shake control, be sure you have it on. Set the camera to "auto" everything until you become more familiar with it.

This is a common problem. The metering and light balance are the reasons that you are having problems achieving good results with your photos. All cameras on the auto cycle are calibrated for 18% gray. Another words a photo of all white results in 18% gray. A photo of black results in 18% gray. The camera adjusts the shutter speed and aperture to achieve an average light level of 18%. That is why photos of snow always appear gray. To compensate for this characteristic of the cameras an 18 % gray panel is held in front of the camera and than the settings are set.manually. The metering in the camera is now locked and using the same light levels objects will be in their natural level. A second problem is the white balance. Using flash avoids some of these problems. Adjusting the camera for source lighting type will help the most. The light balance is the cause of discoloration of the objects in the photo. Usually the camera white balance can be set for auto, incandescent, fluorescent, outdoor or flash, Use a manual setting if it is available on you camera, You need to adjust the settings until you get acceptable results. If the photo is dark add light by reducing the aperture number to a lower number allowing more light. After the aperture is open wide(lowest number) increase the exposure to longer time. With very low light levels a tripod may be necessary.. After doing this once record the numbers for next time.

I would ask Nikon, the manufacturer for advice. https://www.nikon.co.uk/en_GB/service_support/repair_centre/main_repair_centre.page

Non Credo che ci sia un'opzione per scegliere la memoria dove salvare, quando si riempie la memoria interna automaticamente va a salvare nella memoria esterna... Fammi sapere ciaoIn English: I don't think there is an option to choose the memory where to save, when the internal memory is filled it automatically goes to save in the external memory ... Let me know bye

It appears the model has a recall of sorts. Your needs professional repair. https://www.nikonusa.com/en/service-and-support/service-advisories/coolpix-3100-3500-4500-5000-5400-5700-and-sq-service-advisory.html https://www.google.com/search?q=Nikon+e5700+cool+pix+service ..

Have a look at this MOV to AVI video converter.Hope this one can help you.I have used this video converter for long.

Nikon Service Centre for that issue.

COOLPIX S3000 ' Nikon

https://www.nikonusa.com > compact-digital-cameras Electronic VR Image Stabilization minimizes the effect of camera shake · Motion Detection automatically detects moving subjects and adjusts shutter speed and ISO ... ..

If the charge light comes on when you plug it in to charge then the battery needs to be replaced. Or something inside needs to be repaired If the light does not come on then the charger or its cord may be bad.

contact NIKON perhaps they can repair it we can not

It sounds like the date memory battery (if your camera model has one) is dead. If you don't see info in the manual, look for a tiny slot in one of the camera's access points like where the SD card or larger battery is and see if you see it there. It will be a thin, tray that contains a button battery. If there isn't one then the camera uses an internal battery that would have to be replaced by Nikon.

How to Use Your Nikon Camera as a Webcam ' B&H Explora

https://www.bhphotovideo.com > ... > Tips and Solutions

The easiest way to set up your Nikon camera as a webcam is to use the new Nikon Webcam Utility. First, download and install the free Nikon Webcam Utility ...

How to Live stream with Nikon Cameras ' Nikon Webcam Utility

https://www.nikonusa.com > learn-and-explore > webca...

Use your Nikon DSLR or Mirrorless camera as a high quality Webcam for streaming with the Nikon Webcam Utility!

Is the card cheap? Is the card a class 2 or lower? Is the card full of pictures that you should have downloaded a long time ago? Are your batteries almost depleted? These are things that will slow down a camera.

At the Time the Camera was made , Nikon lists a number of compatible memory cards. Each year both cameras and cards can read and write data faster. Cheap cards today can be read much faster than written. If any camera can take many photos in a short time, a slow cad will not allow the camera to operate as intended.