Morphy Richards Recent Questions, Troubleshooting Help & Support

copy and paste link https://www.morphyrichards.com/sites/g/files/emiian486/files/2022-02/IB732102.pdf

The beeping and flashing green lights on your Morphy Richards 732007 Super Vac handheld device could indicate a specific error or issue with the device. Here are a few troubleshooting steps you can try:

1. Check the battery: Ensure that the handheld device is fully charged. If the battery is low, it might cause the beeping and flashing lights. Charge the device according to the manufacturer's instructions and try again.
2. Clean the filters: Clogged filters can impact the device's performance. Remove and clean the filters according to the user manual's instructions. Make sure they are completely dry before reattaching them.
3. Check for blockages: Inspect the nozzle and suction pathways for any blockages or obstructions. Clear away any debris that might be interfering with the device's operation.
4. Reset the device: Sometimes, a simple reset can resolve minor issues. Turn off the device, remove the battery (if removable), wait for a few minutes, then reinsert the battery and turn it back on.

If your Morphy Richards steam generator iron is experiencing intermittent steam and you suspect a blockage in the hose, here are some steps you can take to address the issue:

1. Check the water tank: Ensure that the water tank is filled with clean water and that the water level is adequate. Low water levels can affect steam production. If necessary, refill the water tank.
2. Examine the steam settings: Verify that you have selected the appropriate steam settings on your iron. Some models have different steam intensity levels, so make sure you have set it to the desired level.
3. Check for blockages in the hose: Disconnect the hose from the iron and inspect it for any visible blockages. Use a long, flexible brush or pipe cleaner to gently clean the inside of the hose and remove any debris or mineral deposits that may be causing the blockage. Ensure that the hose is securely reattached to the iron after cleaning.
4. Clean the steam vents: Over time, steam vents on the iron's soleplate can become clogged with mineral deposits or fabric fibers. Use a cotton swab or a soft brush to clean the steam vents, removing any buildup that may be obstructing the steam flow.
5. Perform a thorough descaling: While you have already used white vinegar for descaling, it's possible that there are still mineral deposits causing the blockage. Consider using a commercial descaling solution specifically designed for steam irons. Follow the instructions provided by the manufacturer of the descaling solution to effectively remove any scale or deposits that may be affecting steam production.
6. Contact customer support: If you have tried the above steps and the issue persists, it may be best to contact Morphy Richards customer support for further assistance. They can provide specific troubleshooting steps or advise on potential repairs or service options.

Remember to always follow the manufacturer's instructions and safety guidelines when cleaning and maintaining your steam generator iron. If you are unsure or uncomfortable with any aspect of the troubleshooting process, it's recommended to seek professional assistance to avoid potential damage or injury.

It is a brass nut, where did you break it? There are tricks. https://www.google.com/search?q=morphy+richards+elite+boiler+nut .. ..

try cleaning the toaster but uplugg it first, maybe there are crumbs stuck in the toaster that wont let the bread toast

I have same problem. MR breadmaker tests as OK for earth leakage, but blows circuit breaker when begins the heating cycle. Electrician advises that dust and/or moisture can make internal switches work poorly which leads to tripping of modern circuit breakers. He suggested taking it to service centre for a clean and test, but wasn't hopeful that this woudl cure the problem. Costs more to get things fixed than replace them nowadays!

hello,

the chemical taste of smell from your kettle means that the element in the kettle which provide heat to boiled the water has gone bad due to over heating

this occur when there is shortage of water level in the kettle when the power supply is on

to fix up this problem of smell and chemical taste in your boiled water you will have to make a change of the element (heater)because it has gone bad you can get a replacement of it in the store .

thank you and thanks for using fixya.

try manufacturer.

Too much in the soup maker....remove some ingredients and restart.

You have calcium build up I used some vinegar and it cleared it out

possible break in power cord to it or bad control board

remove the mains plug overnight. Try next morning. If it still does it, you need a new one. If you get 4 or 5 years out of a toaster you are doing well.

PERHAPS IT NEEDS REPLACED .

Please ensure that the soup maker has not been overfilled as the unit has an overfill detector and this will cut the power to the blending blade. If this happens, simply remove some of the ingredients so that the fill mark is not exceeded and wipe the overfill detector on the lid.

HAVE NO IDEA WHAT MIGHT BE WRONG WITH IT . THAT MAKE IS NOTSOLD LOCALLY SO HAVE NEVER SEEN ONE .BUT FIXYA HAS NO REPAIR FACILITY

Hi, what sometimes happens is the drive belt snaps or comes off the pulleys underneath. If your machine has a removable panel on the bottom remove that panel and let me know if the belt is broken. If it is don't throw it away. I'll need the code # off the belt to see if I have a replacement in my stock. Email me if your belt has broken.

well ans 1 possible it could be a switch or connection problem need to analyse problem 2nd up to you if you want fix or just replace ---and blowing breaker makes it non operational

Free online manual: https://www.manualslib.com/manual/369140/Morphy-Richards-48221-Breadmaker.html

you have to check wire or just go to someone expert in your area

Bring to Service Centre.