Mastercraft Garden - Page 9 - Recent Questions, Troubleshooting & Support
Countax c550 loss of transmission and cutting deck.
The owners manual shows 5 fuses. Remove and check each fuse for continuity.
Is the CHARGE indicator lit while engine is running?... regardless check battery voltage with a DMM. With engine running at medium throttle battery voltage should be >13.0VDC. Less than 12.6VDC implies charging system and/or battery failure. Less than 12.0VDC and electronics may not work properly.
The wiring diagram is included in the owners manual available no fee at the following URL.
https://www.manualslib.com/manual/32031/Countax-Garden-Tractor.html
11/11/2023 7:16:00 PM •
Garden
•
Answered
on Nov 11, 2023
How to set idle speed on B & S push mower
On early model carburetor there is a throttle stop adjustment screw, newer models require mechanical adjustment.
Observe the throttle butterfly lever when adjusting the throttle.
11/6/2023 2:09:21 PM •
Garden
•
Answered
on Nov 06, 2023
I have an automower with message Pin Code Expired
This is usually due to the contact for the stop button not working. Normally, the message "Pin Code Expired" is replaced by "Enter Pin code" when you press the stop button to access the keyboard. If the stop button doesn't work, the mower thinks the keyboard cover is still closed and therefore continues to display "Pin code expired".Open the large lid (the one that gives access to the mowing height selector) and look near the stop button, there's a small rectangular thing connected to a wire and held in place with a metal clip. Take off the clip with some flat object like a screwdriver, then take out the rectangular thing, which has a tiny button on it. Press the button a few times to unstick it. You should now see "Enter pin code" on the screen. Put everything back the way it was, and you should be all set.By the way, I know this question was posted in 2010, I'm posting the reply to help others googling for this question. I saw some people actually had their motherboard replaced unnecessarily for this simple problem!
11/1/2023 8:19:42 PM •
Garden
•
Answered
on Nov 01, 2023
BR 600 blower fuel line pops off
Leave fuel cap off and filter submerged. Ether fish out the fuel return or at least position where it's visible. Then press the purge bulb several times. Fuel should spurt out the return. If no fuel from return line and air bubbles come from filter, lines are reversed somewhere.
11/1/2023 3:28:05 PM •
Garden
•
Answered
on Nov 01, 2023
Living Accents Assembly guide for 8048106 pergola
1. Place the Pergola structure onto a flat surface in an area with adequate space for assembly and use.
2. Unwrap the hardware bag (included with the pergola) and place the contents on the flat surface near the structure.
3. Begin the assembly by attaching one of the long side rails to the top of the Pergola. Insert the rail into the slot at the top of the structure. Securing it with the provided hardware. Tighten the four screws using a drill to firmly secure the rail in place.
4. Next attach the second long side rail in the same fashion.
5. With both side rails firmly in place, attach the short side rails. Insert the rail into the slot at the top of the structure and then secure it with the provided hardware. Tighten the screws using a drill to firmly secure the rail in place.
6. Repeat this same process to attach the remaining short side rail.
7. Attach the four corner brackets using the provided lag bolts and washers. Some models may require different hardware for this step.
8. Secure the corner brackets with the provided bolts and washers.
9. Attach the remaining lag bolts into the holes in the top of the Pergola frame.
10. Tighten all the screws and bolts using a drill which will secure the frame in place.
11. Place the canopy (sold separately) on the top of the Pergola frame and secure it using the provided hardware and tools.
12. Once the canopy is secured in place.
10/31/2023 3:23:34 PM •
Garden
•
Answered
on Oct 31, 2023
Tiller tines don't turn when I throttle?
Here are some possible causes and solutions:
Belt Issues: If the drive belt is broken or loose, the tines won't turn. Check the belt tension and replace the belt if necessary .
Idler Assembly: If the idler assembly is not properly tensioning the drive belt, the tines won't turn. Adjust the idler assembly or replace it if necessary .
Engagement Cable: If the engagement cable is loose or not tensioned properly, it may need to be tightened or replaced altogether .
Transmission Issues: If there is an issue with the transmission, such as a broken gear, the tines won't turn. Stop using the machine immediately and inspect the transmission .
Since you mentioned that your tiller tines were turning fast after replacing the carburetor and then stopped turning after connecting the throttle cable, it's possible that there is an issue with the engagement cable. You may want to check if it's properly tensioned and connected to ensure that it's not causing any issues
How To Fix Tines That Will Not Move - Tiller Repair
10/31/2023 4:16:29 AM •
Garden
•
Answered
on Oct 31, 2023
How do I tell what year model my Kabota RTV900 XT is?
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjF7pm4xpSCAxVEmIkEHaPbAvoQFnoECB0QAQ&url=https%3A%2F%2Fwww.orangetractortalks.com%2Fforums%2Fthreads%2Fcan-i-determine-what-model-year-from-serial-code.45724%2F&usg=AOvVaw320X8niJs2M0dRBU5lxjT6&opi=89978449
10/26/2023 8:28:04 PM •
Garden
•
Answered
on Oct 26, 2023
Not finding what you are looking for?