Magic Chef Washing Machines - Recent Questions, Troubleshooting & Support

I put this answer in the comments but re-posting here because I didn't know what I was doing : ) The Magic Chef 2.1 cu ft Portable washer manual says that its a door malfunction and the solution is to open and close the door. That did not work for me so if you're having the same issue that I am it may be that your washer is not level. I had placed mine on top of a few folded throw rugs to stifle noise (I live in an apt, on the second floor) and the rugs were uneven. As soon as i adjusted them, the washer began to work again. I hope this helps.

Check the lid switch assembly: If the lid switch assembly is defective, the washer will not spin. To test the lid switch for continuity, use a multimeter. If the lid switch does not have continuity, replace it. Inspect the drive belt: If the drive belt is broken or loose, the washer will not spin. Inspect the drive belt for signs of wear or damage. If the belt is damaged, replace it. Examine the motor coupling: The motor coupling connects the motor to the transmission. If it is broken, the washer will not spin. Inspect the motor coupling for signs of wear or damage. If it is damaged, replace it. Check the clutch assembly: The clutch assembly engages and disengages the transmission with the tub during the spin cycle. If it is worn or damaged, it may prevent the washer from spinning. Inspect the clutch assembly for signs of wear or damage and replace it if necessary. If these troubleshooting steps do not lead to resolution, you may have to resort to a professional repair service.

E4 indicates the washer failed to drain out after 4 minutes, after that time the code is set. Check and clean the drain filter first.

FIXYA does not sell parts.Use the internet to search, or visit retail stores that carry that model to request assistance.Part number or at least model number is needed to search using Google.com Possibly available thru Home Depot, Walmart, online at Amazon.com, or www.repairclinic.comhttps://www.repairclinic.com/PartDetail/Lid/WPW10193857/1456205?TLSID=1779&Ref=611198&gclid=CjwKCAiAzanuBRAZEiwA5yf4ulvClQ-c9bkG6bmkfD91ywohSLeEMqIxuQ4R7ziLpTtNgirJg3gcyxoCO7MQAvD_BwE

Check with repairclinic.com

You have a fault with the pump if there is nothing jamming it then the pump needs replace

If it’s not visible, it’s probably hinge activated.

Warter line stoped up

You need to the company wed site We at FIX YA don't make appliances

Call warranty service. Anything else could void warranty

If it's new get warranty service or take it back

Unplug your machine again. Remove items from washer ringing out items as you do so. I am thinking that your machine has jammed up at the bottom of agitator, and nothing can move because of this. Now if you don't have an agitator then you may have a reset button somewhere on machine. Good Luck Friend.

it is a sign that the dampeners on the ends of the tub suspension or support rods have failed A pack of 4 cost around $80.00 and with a technician doing the job can be done in 15 minutes with you doing the job , around 1 hour unless you can get the spares people to explain how it is done get the spares from the service agent spares any unbalance gets out of control unless it is got under control very early and that is what these dampeners are designed to do and 4-5 years is the design life expectancy