Magic Chef Ovens - Page 5 - Recent Questions, Troubleshooting & Support

Need to find out what size oven to buy to replace Magic Chef : 59GN -5TVW

Hi, Most likely the ignitor is too weak to open the safety valve for gas to be released, remove the ignitor and take it to your local appliance parts store, this can be tested on the counter. (Danger, fragile and easy to break, don't touch the element with you hands) Failure to treat with care will cause the ignitor to break, unplug the unit from the wall prior to removing the ignitor from the unit. Ignitor should have a amp reading of 3.2-3.6 to work effectively, if less it needs to be replaced. God Luck I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

I am sure you will just have to replace the oven igniter (glow bar) These will crack and not let any power through the oven valve.

Most of them come out from the inside. Don't know why that one would be any different. You have to open the door or sometimes take it completely off. To disassemble it.

I think you should have more numbers. there are quite a few other series for this unit. I have posted a site below for your assistance.

http://www.aaarv.net/bt22_series_parts.htm

Please rank if this helped

If it has a timer, make sure it is set to manual,and not flashing auto.
In the auto mode the oven will not work.
Plz rate this solutioin.
Thanks.