Lifespan Exercise & Fitness - Page 9 - Recent Questions, Troubleshooting & Support

No manual available. The generic manual in the link might be close enough. https://www.google.com/search?q=Avia+2+function+pedometer+manual ..

See if you can spray some electrical switch cleaner behind it. It will be a membrane keypad.

You would have to define 'it'. It is impossible to give answers without full 'make model (what it is)'. Also not sure what "How do you unlock **deliver**" means?? Googling 'make model manual' will probably solve, but I can't think of any that convert from treadmill to stair climber.

I'm sorry to hear that you're experiencing issues with your Lifefitness F1 Treadmill console. Based on the information you've provided, it seems like there might be a problem with the console itself. Here are a few troubleshooting steps you can try to resolve the issue: 1. Check the power source: Ensure that the treadmill is properly plugged into a working power outlet. You mentioned that there is power going to the control panel, so this step seems to be fine in your case. 2. Reset the treadmill: Locate the reset switch or circuit breaker on the treadmill, typically located near the power cord. Press the reset switch or reset the circuit breaker to see if it resolves the issue. Give it a few seconds before trying to power on the treadmill again. 3. Check the console connection: Open the console and inspect the wiring connections between the console and the treadmill. Ensure that all cables are securely connected and there are no loose or damaged wires. If you find any loose connections, reattach them firmly. 4. Contact customer support: If the above steps don't resolve the issue, it's recommended to contact Lifefitness customer support directly. They can provide specific troubleshooting advice for your treadmill model or arrange for a technician to inspect and repair your console. Remember to refer to the user manual or contact customer support for model-specific instructions and support. They can offer further guidance and assistance based on the specific details of your Lifefitness F1 Treadmill. This might help

It appears that there may be an issue with the speed and incline controls on your used Sole F85 treadmill. Based on the information provided, here are a few troubleshooting steps you can try: 1. Check the control panel connections: Ensure that all the cables and connectors between the control panel and the motor control board are securely plugged in. Loose or faulty connections could cause issues with the speed and incline controls. 2. Inspect the control panel buttons: Examine the buttons on the control panel to see if any are stuck or not functioning properly. Sometimes, debris or dirt can accumulate beneath the buttons, preventing them from working correctly. Gently clean the buttons and the surrounding area to remove any obstructions. 3. Test the speed and incline motors: The issue could be related to the motors responsible for adjusting the speed and incline. Test the motors individually by manually applying power to them while disconnected from the control panel. Observe if they respond correctly to the input. If the motors do not respond as expected, they may need to be replaced. 4. Examine the motor control board: Inspect the motor control board for any signs of damage, such as burnt components or loose connections. If you notice any issues, it may be necessary to replace the motor control board. 5. Seek professional assistance: If the above steps do not resolve the issue, it is advisable to contact a professional technician with experience in treadmill repairs. They will have the expertise and specialized equipment to diagnose the problem accurately and recommend the appropriate course of action. Since your treadmill is a used model and the control issue has persisted for some time, it is possible that the problem is more complex and requires professional attention. A technician will be able to provide you with a more precise diagnosis and help you determine the best solution to get your Sole F85 treadmill functioning properly again. Remember to prioritize your safety when dealing with electrical equipment, and always disconnect the power source before attempting any repairs or inspections. These videos might help

If your Precor C964i treadmill is displaying a "stuck key" error message and it seems to be related to the reset button, here are a few steps you can try to address the issue:

1. Power cycle the treadmill: Turn off the treadmill and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on again. This simple power cycle can sometimes help reset the system and clear temporary errors.
2. Clean around the reset button: Use a soft cloth or cotton swab to gently clean around the reset button and the surrounding area. Dust, dirt, or debris might be causing the button to get stuck or not register properly. Ensure there are no obstructions or residue that may affect its functionality.
3. Inspect the reset button: Check the reset button carefully for any physical damage, such as a tear or debris lodged underneath it. If there is a tear in the button or it appears to be damaged, it may need to be replaced. Contact Precor customer support or a qualified technician to obtain a replacement button and guide you through the replacement process.
4. Reset the treadmill: Some treadmill models have a reset function that can help resolve minor issues. Refer to your treadmill's user manual or contact Precor customer support to find out if there is a specific reset procedure for your model. Follow the instructions provided to perform a reset, which may help clear any error messages related to the stuck key.
5. Contact Precor customer support: If the above steps do not resolve the issue, it's advisable to reach out to Precor's customer support for further assistance. They can provide specific guidance based on your treadmill model and help troubleshoot the problem. They may recommend additional steps or advise on whether a technician should be involved to repair or replace the reset button.

When contacting customer support, provide them with the specific error message, details about the tear in the reset button, and the steps you have already taken to address the issue. This will help them provide more accurate assistance and solutions tailored to your situation.

The exercise ball was developed in 1963 by Aquilino Casani, an Italian plastics manufacturer. He perfected a process for molding large puncture-resistant plastic balls. The balls were first used in treatment programs for newborns and infants and nowadays the balls are for exercises and physiotherapy.

Question edited for clarity. Question moved from 'Power Computers'. It is older than 3 years as there is a warranty on the electronics. my only thought is to check the power adapter for output with a multimeter. https://www.toughtrain.com/owner-manuals/10439-afg-3-1ae-elliptical.pdf Service Manual

3.5AE & 7.5AE Service Manual

https://content.johnsonfit.com > service_guide PDF 4.2 No Power to The Console . ... Hold for 3 seconds to reset the console. ... For information about connecting your tablet to your AFG Sport elliptical, ... ..

https://www.youtube.com/watch?v=8sEI3k8q-6I

It is an issue with the safety key. Remove it and push it in firmly.

TROJAN PEGASUS 400 USER MANUAL Pdf Download

ManualsLib https://www.manualslib.com > ... > PEGASUS 400 View and Download Trojan PEGASUS 400 user manual online. PEGASUS 400 treadmill pdf manual download.

• Trojan Pegasus Instruction Manual - Treadmill

  https://www.manualslib.com > ... > Treadmill > Pegasus View and Download Trojan Pegasus instruction manual online. ... Ensure that the safety key is installed, as the treadmill will not power on without it.

The manual says you need to be able to lift 40 lbs safely to raise of lower the treadmill running platform, I I would guess twice that to physically lift it. The weight limit for a person using it is 250 lbs https://www.manualslib.com/manual/502826/Lifestyler-Expance-800.html#manual ..

Hi Tom, Hope so you're doing fine, cross tube is a structural element that connects the front and rear sections of the machine. If you need to change the axle bearings and remove the cross brace, you may require a specific tool known as an extractor. However, the availability of such an extractor and the specific procedure for removing the cross brace may vary depending on the manufacturer and model of the cross trainer. I recommend consulting the user manual or contacting Reebok customer support directly for detailed instructions on how to safely remove the cross brace and perform the necessary maintenance on your Reebok ZR9 cross trainer. They will be able to provide you with accurate information and guide you through the process. Hope so this will help you! Regards, Bryce June

Appears not, but there appears to be a pizo speaker, round thing, by the power cord. Place a piece of duct tape over it. It'll muffel it. Best to you

https://www.google.com/search?q=Aerofit+AF-737+TREADMILL+Error+Code+E01 ..

Parts suppliers in the link. This is not a North American brand. https://www.google.com/search?q=Aerofit+AF-737+TREADMILL+replacement+parts ..

It will be the same procedure as replacing the belt. They usually has a mechanism for tensioning the belt. That needs slackening off first. You could contact a seller, or watch the videos

Total Gym CycloTrainer for intese Cardio Workout

Total Gym Direct https://totalgymdirect.com > shop > total-gym-cyclotra... Easy Low-Impact Workout - simply lay back and cycle with the glideboard anchored at the bottom of the rails. Strengthen your core; .. US$399.95 · ‎In stock

• Total Gym CycloTrainer for intese Cardio Workout

  https://totalgymdirect.com > shop > total-gym-cyclotra... Boost your cardio workout with Cyclo Trainer for Total Gym! ... shavings from a rubber belt (presumably a belt that is used to increase the resistance?)

Amazon has them https://www.google.com/search?q=V-Max+MPE+Fitness+6380R+AC+Adapter ..

Here is there Support. Contact is at the bottom of the page.

Technogym Customer Support

Technogym https://support.technogym.com Technogym Customer Support is where you will find all the answers to your frequently asked questions, articles and useful resources to help you to get the ... I also found this A message stating 'the equipment is blocked' essentially means that a problem was detected that *might* be a blockage against moving of the moving parts. This commonly can be owing to two things: 1. the upper and lower assemblies (i.e the upper is the console, the lower is the electronics or boards in the lower part of the treadmill, e.g. the motor controller board and brake board) have a fault in the communication between them. This indicates first that you need to check the cable between console and lower assemblies, and also to re-seat either end, or at minimum make sure there is no breakage or crimping in that cable or wire harness, between console and lower assembly and lower boards. or 2. the error was detected by the brake board, and one must go through the error procedure for a brake board error. (In some models, (2) requires accessing the Low Kit Menu, to see whether there is a genuine error registered in the Low Kit Fault area of memory.) Also 3. you might unplug it from power while it is On, and see how that works, after about 2 hours unplugged, please. ..