LG KE - Recent Questions, Troubleshooting & Support

You can't. You need a remote.

Replacement remote control for LG LH-D6230

Remotes World https://remotes-world.com > LG Replacement remote control for LG LH-D6230 with all functions of original one. It replace each button of original remote control. You will receive it with ...

See page 36 of this manual. It may help. https://gscs-b2c.lge.com/downloadFile?fileId=N9iqwMbFNb6ZzkUVITsZfQ

Instead of aux (Blue Connector of PC Sound), try using head phone jack (Green Connector of PC Sound). It if is working fine, uninstall sound driver of your PC, restart PC and install sound driver again. Your problem will be fixed.

To reset your LG LHB 625, follow these steps: Turn off the device and unplug it from the power source. Wait for a few minutes and then plug it back in. Press and hold the STOP button on the front panel of the device for at least five seconds. The display will show "INIT" and the device will reset to its factory settings. LG LHB625 Product Support :Manuals, Warranty & More ' LG U.A.E.

Question edited for clarity, and wrong type of threw > through. Question moved from Car Audio. Page 29 of the Manual tells you how to get out of 'Demo Mode'. https://manuals.plus/wp-content/sideloads/lg-mini-hi-fi-system-model-cj45-cj45-cjs45f-cjs45w-owner-s-manual-optimized.pdf ..

I had the same issue twice (2 diffrent devices) on LG Blue-ray HX-906 - stuck on "please wait" after switching it on. It turned out to be defective mainboard - main BGA chip (the one with black radiator) has some problem with connection to mainboard. Here is how to repair it:- dismount the mainboard- take off the radiator from the main chip- put alluminium foil around the chip to avoid unnecessary heating up of other parts of PCB- heat up the chip using air hotgun to about 200 celsius for about 5 minutes. Mount everything in reverse order and enjoy

The back of the lry517 has 2 sets of audio outs and 1 set of audio ins. If you are using the component video outs, use the audio outs to the right of the component outs. If you are using AV1, it should be the audio to the left of the component outs. The tape's audio may be very low, try turning up the tv volume? You could also try adjusting the tracking? Have you tried using the AV1 outputs? It would be Composite Video and stereo audio.

Help in the link https://www.google.com/search?q=LG+DM5660K+DISPLAY+PROTECTION