LG Recent Questions, Troubleshooting Help & Support

Probably not cost effective, due to specialist tools to remove and press the new bearing in.

The bearings are failing or devoid of lubrication.

You can't they are sealed. You just replace them. The sealed bearing units are shown here. Change them yourself and save a callout and an hour and a half labour.https://www.google.com/search?q=LG+TROMM+bearings

The LE error code means that you have a motor problem.  The high pitched noise means that the motor sensor has failed and needs to be replaced.  You will need to call a qualified LG technician to replace the sensor.

check here.... https://www.tunesbro.com/wipe-everything-off-lg-phone.html Best to you.

Do you have a test meter to check if the power button is working and has continuity? My advice with a suspected control board is always to get professional diagnosis due to the cost or control boards. It would be a shame to buy one and find it doesn't fix the issue. ..

It is not online in my part of the world. This link should find it where you live if it is available. https://www.google.com/search?q=LG+DSI8556P+manual ..

C5 error blue star air condition

Order a factory remote on ebay, they're only a few bucks.

Hi Leigh, I can give you some useful advice on your TV. First thing to do is unhook the ribbon cables going from the tcon to the panel boards one at a time ( they will be flat cables) , then power the set on, if you see a normal half a picture on the side that's still hooked up and white or black on the unhooked side you have a bad panel and the set won't be repairable, if you don't get a good half a picture most likely the panel is ok, then there is 2 other possibilities, bad tcon or main board, this 100% will NOT be a power supply issue like the other posted advised. I'd replace the tcon first as it's much less costly than the main, if that doesn't fix it it's the main, unfortunately there isn't a way to test either board without several thousands of test gear, only option is order a good board. Best place to get boards is shopjimmy.com, however if they're out stay away from ebay, a lot of sellers on there get sets that don't work and part them out with no idea of what boards are bad or good, it's very possible you would get another bad board. Hope this helps.

Check out these sites.... https://duckduckgo.com/?t=ffab&q=+lg+ac+inverter+showing+ch05+error&atb=v159-1&ia=web Best to you.

1. Check the remote control: Look for a button on your remote control labeled "Beep" or "Sound". Press this button to turn the beep sound back on .
2. Check the settings: If you can't find a "Beep" or "Sound" button on your remote control, check the settings menu on your AC unit. Look for an option to turn the beep sound on or off and make sure it's turned on .
3. Reset the AC unit: If neither of these steps work, try resetting your AC unit to its factory default settings. To do this, turn off the AC unit and unplug it from the power outlet. Wait for a few minutes and then plug it back in and turn it on .

If none of these steps work, it's best to contact a professional or LG's service center for further assistance. I hope this helps!

It is a gas appliance and can only be worked on by a registered gas appliance technician. They will have access to the codes, they are generally hidden to the general public. Call for service.

This will be a capacitor issue in one of the sus boards, look for bad caps or pull them and test with a capacitance tester.

here is a link to unstructions copy and paste https://www.manualslib.com/manual/243281/Lg-W2043t.html#manual

We need a Model # to assist you. Please.

unplug the power for 10 minutes then plug it back in. this seems to work on mine,

can you please check, you put the SIM in phone in right way or not.

Unscrew the ignition button and you will find a single AA Battery. Page 8 of the manual refers. BATTERY ASSEMBLY • In order to install the battery, remove the ignition button housing. Please keep the positive pole of the battery facing toward you. Insert the battery into the housing. Replace the ignition button housing after battery is installed. https://manualsbrain.com/en/manuals/1305177/?page=10 And a tip, don't let rain fall on that button. I was BBQing last autumn in torrential rain and the next time I used the grill, the igniter didn't work. I dried it replaced the battery, sprayed it with WD40 and nothing worked. This summer it started working again. ..