LG Flatron - Popular Questions, Answers, Tips & Manuals
Hey I have an LG Flatron L1718S screen that work fine for a few weeks then suddenly switch off for a few days ,then switch on again,it's a irritating cycle.Please HELP
- Larry Ng Jul 15, 2021that is just a YEAR 2007 LCD computer monitor, it needs a computer to work. if it fails in a 2nd PC ,
if that test fails,the monitor is bad. (hardward failure, monitor.
the tests are simple,
it fails on 2nd good PC, what can be more simple that test ANY 14 year old monitor on a 2nd good PC.
when dead do this.(test2)
they are all here when dead again use a FLASH LIGHT. (or in UK a low carbon foot print TORCH)<< joking.
https://pcdied.com/monitors_and_screens/...
all monitors older than 2010 do this . (has CCFL inside and that is never fun now)
the cure is newer monitors 2011 to now called LED monitor.s or OLED.
the tubes are cold cathode florescent tubes. (back lamps.) (have 5 classic fail symptoms not just dead)
they are short lived,
laptops and monitors both back then. 20,00hours on the clock and go bad. bank on it.
the 3 failures are CCFL, PSU board, and logic board
#1 is CCFL the all died long ago, on average about year 2003 (07 +5= 12, 2012) at 20,000 yours boom dead.
or intermittent.
PSU is here:
https://pcdied.com/monitors_and_screens/...
below is logic board.
one of the 3 fail, CCFL tubes dead is like 99%
we retire them if the CCFL test fails. (using bench PSU to test them) but you have non of that so. upgrade
-
Larry Ng Jul 19, 2021
logic board. (CCFL tubes dead, PSU dead, or logic board dead) and or thermally failing , and bad.
-
Anonymous Jul 23, 2021
99% of all monitors are all dead. due to those silly low live CCFL back lamps.
or the 2cards inside that can fail too. PSU card +HV CCLF power or the Data card is dead.
99.9% of folks seen these facts, upgrade now.
high voltage inside 600v on the CCFL pins
7/15/2021 5:02:24 AM •
LG Flatron...
•
64 views • 0 helpful votes
Monitor slow to display picture
Hi, Sounds like an issue of the video card not the monitor. Take to computer shop to verify. One thing you can try is drop the dpi down (refresh rate)a bit. Then try again. If that makes sense to you. Hope that helps.
2/10/2018 8:24:03 AM •
LG Flatron...
•
217 views • 0 helpful votes
Hello, today i unluged my
That's probably a message from the monitor because it's not getting a signal from the computer. Look at the VGA cord where it plugs into the computer, or the monitor to see if you bent pins when reinserting the plug.
2/18/2018 2:30:03 AM •
LG Flatron...
•
102 views • 0 helpful votes
My Monitor all of a sudden just turned off
Most likely gone... it would require an electrician to go testing the different components of the monitor inside.
And maybe even someone like that cant fix such things.
1/10/2018 6:36:04 PM •
LG Flatron...
•
79 views • 0 helpful votes
W2061
What lights are you seeing? Any indicators? What about the power button itself? Any response?
1/10/2018 6:12:03 PM •
LG Flatron...
•
71 views • 0 helpful votes
Installing mount on LG Flatron
Hello,
It´s not safe to anchor it to the plastic back, monitors usually have a metal frame inside that support the weight of the monitor.
11/12/2017 4:48:03 PM •
LG Flatron...
•
264 views • 0 helpful votes
I am having a blurred
Ya gotta be kidding! You still have a CRT monitor? CRTs have a focus adjustment around the neck of the big tube. The shop screwed it up. Spend $50 and get a nice used LED or LCD flat screen.
No picture
It could be a simple cap problem on the control card. But, a 17"? That may not be worth the effort. Unless you have time and curiosity to look for a damaged component on the inner board. Since it does nothing screenwise it is probably something obvious if you open it up.
Good luck with your project. Maybe this will help. https://www.manualslib.com/manual/786974/Lg-Flatron-L1715s.html
9/26/2017 3:24:03 AM •
LG Flatron...
•
140 views • 0 helpful votes
Not finding what you are looking for?