Lexmark Office Equipment & Supplies - Page 3 - Answered Questions & Fixed Issues

hi How to connect wireless Lexmark printer?

1. Click on Add a printer.
2. Select "A Network Printer, or a printer attached to another computer."
3. Select "Connect to a printer on the Internet or on a home or office network."
4. Type in the printer IP address.
5. Select Next.
6. Select Manufacturer and Printer model.
7. Click OK.

hi find link https://www.helpowl.com/p/Lexmark/X5630/Research/160781?search=lexmark%20x5630%20ocr%20software

hi find link for video https://infoserve.lexmark.com/ids/idv/video.aspx?category=Multifunction+Products&productCode=Lexmark_XC4140&topic=v34899506&vId=CX725x%2Ffuser_remove&ar=16%3A9&ap=1&l1=4&l2=3&sh=657&sw=1366&loc=en_PH

You can't use remanufactured or third party copies. Genuine only. If you are disconnect overnight or do a reset.

You won't be able to print if one of the cartridges is out of ink. The printer needs all cartridges with sufficient ink levels to prevent damaging the printhead.Every time a cartridge is replaced, all colors are primed simultaneously thus the need for all cartridges to have ink.

You did not say what version of windows you are using but the most common fix is to delete the printer and if it asks if you want to delete the driver files say YES. Then reboot the computer and it should reinstall the printer.

https://www.manualslib.com/manual/624500/Lexmark-X264dn.html?page=54&term=935.xx&selected=1#manual https://www.manualslib.com/manual/624500/Lexmark-X264dn.html?page=1#manual

Normal 0 I suggest you get a sheet of Card Stock (Heavy paper) and place it in the feed way. Then press the print button applying a slight amount of pressure on the Card Stock so it will feed through the printer. The reason for this, is in some cases I have been able to clear the paper track of debris that was deposited there over time.
Worth a try, as I have fixed a number of printers this way, saving costly repairs.
Hope this helps. Bud

there is a manual on google

To reset the maintenance count 1. Turn off the printer 2. Press and hold the 2 and 6 buttons simultaneously. 3. Turn on the printer. 4. Release the buttons after 10 seconds. The Configuration Menu appears on the LCD. 5. Touch Reset Maintenance Counter from the Configuration Menu. 6. Reset Maintenance Counter appears in the header and Yes and No appears below the header. 7. To cancel the reset operation, press Back or No. All other button presses are ignored. 8. To initiate the reset operation, select Yes. The maintenance count resets to zero and the LCD returns to the Configuration Menu

A printhead error indicates that the printer thinks a failure has occurred in the printhead unit. ... If the printer continues to display a Printhead Error message, make sure it is plugged straight to the wall and not through a surge device or power strip.

Lexmark United States Error: "93X Printhead Error"

Videos as well https://www.google.com/search?q=Lexmark+Printhead+Error ..

User's Guide - Printers101

https://www.printers101.com > 2500_ug

PDF The Lexmark Forms Printer 2500 Series printers have control panel overlays available in different ... Resolution of up to 144 x 240 dots per ... 4 Check the network setup page to find the IP Address and the Fully Qualified Domain Name.

Lexmark United States Methods for Identifying the IP Address ...

http://support.lexmark.com > ...

Several methods are outlined as not all printer models offer the same possibilities for identifying their IP address. Procedure. Method 1: Print the Network Settings ... Missing: x ‎' Must include: x

How To Change Ip Address On Lexmark 2500 Series ...

https://www.helpowl.com > Technical-Support > chang...

May 24, 2014 - Find answers below for this question about Lexmark Forms Printer 2500. Need a Lexmark Forms Printer 2500 manual? We have 2 online ...

Take the disc to a friend and install onto a USB. Back to computer and install from the USB.This link might also help: https://www.google.com/search?q=How+can+I+install+OCR+if+computer+doens%27t+use+cd&ei=L0yZYPy9K4n0rQH3nYZ4&oq=How+can+I+install+OCR+if+computer+doens%27t+use+cd&gs_lcp=Cgdnd3Mtd2l6EAMyBwghEAoQoAEyBwghEAoQoAEyBwghEAoQoAEyBwghEAoQoAE6BwgAEEcQsAM6BggAEBYQHjoICCEQFhAdEB46BAghEBU6CgghEBYQChAdEB5QroQBWNzUAWC41gFoA3ACeAKAAccEiAHPM5IBDDAuMjAuNS4yLjEuMpgBAKABAaoBB2d3cy13aXrIAQjAAQE&sclient=gws-wiz&ved=0ahUKEwi8kYyWsr_wAhUJeisKHfeOAQ8Q4dUDCA4&uact=5

Its not an Issue with the Out of Ink Error: Please try the below mentioned steps and let me know what happens: It insists there is a Cartridge problem on the Printer............ In this Case take out the Paper from the Paper Feed Tray........ Unplug the Power Supply from the Printer.......... Remove both the Cartridges from the Printer.......... Now take a size 10 Envelope fold it so that it should become like a thin long strip........ Now Insert that Envelope on the left side corner of the Printer and move it from right to left and left to right as fast as u can for about 10 times.......... Now Insert the Ordinary Papers onto the Printer and insert both the catridges and Turn on the Printer...... Blinking Stopped...........Issue Resolved....... Still Blinking: Remove both the Cartridges take a Paper Towel turn the catridges direction so that u can see a Copper plate with small boxes on it....... Just wipe it twice or thrice with the Paper Towel.......... Now insert it and Power on the Printer and see whether the Lights are still blinking if it is still blinking...... Good Luck!!!!!

The old cartridge might have dried up and then nothing would come out of it. Just try to softly clean the tip of the cartridge from where the ink or ink powder moves out and sometimes that might open it and if the inside material is still in good shape it might run.

There is no overide option.

Incorrect cartridge make.

Fit a genuine cartridge.

ORC is life form in the Lord of The Rings. What you want is OCR which stands for Optical Character Recognition. It is the software that converts a scanned document into a string of characters that you can edit to correct OCR errors.To be able to scan to a computer the computer and the printer must be connected through a USB port or be part of the same network. When you press the scan button, the printer tries to communicate with the computer and launch the scanning software installed on the computer.Install the software that shipped with your printer, connect the computer and the printer. If everything is correctly connected and installed, the scanning software will open to receive the scanned document.

The Lexmark OCR scan software is available in the installation disk that came with the printer. You can explore the installation disk and look for the Abby setup application in the OCR folder (for Windows). For Mac OS, right-click on the Install icon and choose Show Package Contents. Open Contents folder > open Package folder and manually install the Abby Finereader application.
However, if you don't have the installation disk, contact Lexmark technical support. Thanks.