Kuppersbusch Cooktops - Recent Questions, Troubleshooting & Support

SAve my life! Thank you so much!

Full make and model are useful in such questions. Answer deleted.

Are you sure it is properly wired? For 1 phase 230v: 1= power earth 2-3 intersected = N 4-5-6 are L1-L2-L3 that should be conected together to L Kuppersbusch is not very cooperative about what their error codes indicate, but E6 seems to be a (low) voltage issue, so you might too check the cabling to the outlet, measure the voltage with a multimeter when you successively switch on elements

IN B.C. 30 INCH

there is a site on the net that handles teka and kuppersbrusch phone 1300-912-953 and is called appliancesalesdirect.com.au It is a long shot but they may be able to advise who will handle your problem

That could happen if the pans are not compatable with the unit.

http://kitchen.manualsonline.com/manuals/mfg/kuppersbusch_usa/kuppersbusch_usa_oven_product_list.html

Try turning off the power for a short while to allow the p c board to re set itself turn it back on and individually turn on each elements for a few minutes. Good luck Ray