Kenwood Audio Players & Recorders - Page 6 - Recent Questions, Troubleshooting & Support


Google (kenwood)(at-70)(manual) without parens.

Kenwood Audio... | Answered on Nov 15, 2018


Buttons not working problem
11_12_2018_9_56_47_am.jpg

Kenwood HTB-406... | Answered on Nov 12, 2018


The Kenwood KR-V8070 has no digital audio inputs; it only has analog inputs. You can see the manual's diagram of the rear input/outputs starting on page 4 at ManualsLib: https://www.manualslib.com/manual/287040/Kenwood-Kr-V8070.html?page=4#manual . If you need to connect a device that doesn't have an analog audio output, you will need an analog to digital audio converter. This is one version: https://www.amazon.com/SANOXY-Analog-Digital-Converter-Adapter/dp/B005F20756 . You will need to supply all of the audio cables separately.

The later KRF-V8070D does have coaxial and optical digital audio inputs. I hope this helps.

Cindy Wells

Kenwood Audio... | Answered on Oct 05, 2018


Sometimes it is dirt that has got in the works that causes these sorts of problems. You can take the top cover off the machine and give it good clean inside. You can use Servisol Video 40 to clean it with cotton buds. But before that check that there is no damage to the mechanism first.

Kenwood Audio... | Answered on Aug 12, 2018


If your One For All URC handles audio equipment, you may be able to use code search to find something that works. Otherwise, you may have to shop around to find a URC that does. Newer RCA and GE URCs have that capability.

Kenwood Audio... | Answered on Aug 01, 2018


It would be normal practice to connect the Equaliser via the tape in and out of the amp, to the Equaliser in and out. If you are using a tape deck, then that goes into the Equaliser's sockets for tape decks.
I wouldn't use the Equaliser on any of the Dolby or other coded sound modes as it could effect the signal.

Kenwood Audio... | Answered on Jun 20, 2018


Google (kenwood)(DP-R4070)(manual) without parens.

Kenwood Audio... | Answered on May 31, 2018


Could be a setting that has been changed. Or it could be a bad connection or faulty lead.

Kenwood Audio... | Answered on May 27, 2018

Not finding what you are looking for?
Kenwood Logo

2,745 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

da surgen

Level 2 Expert

96 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...