Kenmore Ovens - Page 4 - Recent Questions, Troubleshooting & Support

0helpful
1answer

I have kenmore c880 model stove , both oven and stove are not heating up after shifting to new house...any tips to get it resolved? Only oven light is working.

Make sure there is 220 volts at the wall socket where you plug the oven into. A faulty circuit breaker in the power panel on your house will only let 110 volts get to the oven so the lights and timers will work but not the heating elements.
11/23/2018 6:57:23 AM • Kenmore Ovens • Answered on Nov 23, 2018
0helpful
2answers
0helpful
1answer

Electric Kenmore stove top burner doesn't work, element has contenuity. Turn on power to said burner, it reads proper voltage, but no heat. Control dial has a simmer button below. what part do i need?

does the element get warm and then no heat? I would just replace it, also I would ensure that all the connections are clean tight.
11/19/2018 5:00:13 PM • Kenmore Ovens • Answered on Nov 19, 2018
0helpful
1answer

My Kenmore oven is not baking properly. Suspect top element is out.

get in an electrician to check the element and wiring
11/18/2018 11:29:12 PM • Kenmore Ovens • Answered on Nov 18, 2018
0helpful
1answer

How do I get my oven door closec on my Kenmore sself cleaning stove after i mistakenly hit clean? Now the lock is on and my door wont close and tge light stays on in the oven?

What had happen is that you activated the self cleaning system motor and it jamb up,now you have to open the back of your stove and you would see a small motor with a rod attach to it , remove the rod from the motor and push back and forth depending where it got stuck to realest the micro switch
10/26/2018 4:37:13 PM • Kenmore Ovens • Answered on Oct 26, 2018
0helpful
1answer

Error code F15

Bad clock / control
10/7/2018 1:35:09 PM • Kenmore Ovens • Answered on Oct 07, 2018
0helpful
1answer

I have a Kenmore oven wit the LOC on the display and

Stands for door lock. Either door lock motor or control board is most likely defective
10/6/2018 6:22:07 PM • Kenmore Ovens • Answered on Oct 06, 2018
0helpful
1answer

Kenmore stove

Your Kenmore oven has a built-in fault detector. When the oven detects an issue, the display screen on the control panel will flash a fault code. The F10 fault code on your Kenmore oven indicates that the thermal protector on your oven's control unit, or microcontroller (MCU), has overheated. If the MCU overheats, the computer stops all motor functions. Several items on your oven could cause the thermal protector to overheat. Therefore, you must troubleshoot the F10 code to determine why it appeared on your display panel.
10/5/2018 4:23:48 PM • Kenmore Ovens • Answered on Oct 05, 2018
0helpful
1answer

Can i use stove top burner while oven is self cleaning, kenmore model 970-6060?

Most likely Yes although stove top will be very hot
9/30/2018 6:39:28 PM • Kenmore Ovens • Answered on Sep 30, 2018
0helpful
1answer

I need to replace the broil element for my Kenmore 970-6784 oven. Where can I buy the element?

Most any appliance parts store, or amazon, EBay, and other online sources.
9/21/2018 7:41:04 PM • Kenmore Ovens • Answered on Sep 21, 2018
0answers
0helpful
1answer

How do I get a operator manual for kenmore triple task ultra bake model 665.95173300

http://www.allrepairmanuals.com/kenmore-freestanding-electric-range.htm?model_number=66595173300&manual_type=OWNER Appears to also have a service manual for sale. Another web site had a free installation guide, but that is not likely to have operator information. Kenmore Electric Freestanding Super Capacity Range with Ultrabake...
8/1/2018 12:44:00 AM • Kenmore Ovens • Answered on Aug 01, 2018
Not finding what you are looking for?
Kenmore Logo

2,541 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Ovens Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...