Kenmore Microwave Ovens - Popular Questions, Answers, Tips & Manuals

It turns itself on

1. Interlock switch If your microwave is turning itself on, the first thing to check is the interlock switch. This is usually the first thing to malfunction that could cause this issue. If the interlock switch is bad then it will need to be replaced.
2. Main control board If your microwave is turning itself on and the interlock switch is still working, the probable cause is the main control board. If the control board is defective it will need to be replaced.

But before throwing parts at it give these folks a call... https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Microwave/74-6-878350-/New/Kenmore-Microwave-Turns-On-By-Itself-721-85033010 Best to you

It looks like it is too old. Nothing in Kenmore or Viking. https://www.google.com/search?q=Kenmore+Viking+851.8250800+manual ..

These are all the top suppliers, but that model number is not showing. If the display has gone dim, you can get an electronics technician to replace the capacitor that runs the display. https://www.google.com/search?q=Kenmore+Microwave+318279601B+parts ..

If you are getting an F-5 error code on your Kenmore hood combination, it typically indicates a problem with the temperature sensor. This error code may occur when you are trying to use the convection feature, as you have described.

To troubleshoot this issue, try the following steps:

Turn off the power to the unit and unplug it from the electrical outlet.

Wait a few minutes, then plug the unit back in and turn on the power.

Try using the convection feature again and see if the error code reappears.

If the error code persists, you may need to replace the temperature sensor. You can consult the user manual for your Kenmore hood combination or contact Kenmore customer service for assistance with this.

If the unit is still under warranty, it's recommended to contact Kenmore customer service for repair or replacement options.

It sounds like you may be experiencing an issue with your Kenmore stove's timer function. Here are a few steps you can try to resolve this issue:

Check the timer settings to make sure that the correct time and alarm settings have been entered.

Try resetting the timer by turning it off and back on again, or unplugging the stove and waiting a few minutes before plugging it back in.

Make sure that there are no buttons or knobs stuck on the stove, as this could cause the timer to activate repeatedly.

If these steps do not resolve the issue, it may be necessary to contact a professional appliance repair service for further assistance.

Question edited for spelling of Kenmore and typos. Question moved from Kenmore Washing Machines. All about repairing microwave ovens https://www.fixya.com/support/r29874712-repairing_microwave_ovens ..

Maybe get the part here? https://www.partselect.com/Models/790803/

That is the strangest model number for a Kenmore and doesn't follow the normal 3 dot 7 ***.******* format of others. Just measure the front of what you have. They come in standard sizes. https://www.google.com/search?q=kenmore+%22326b1016p001%22+installation+manual ..

This is normal. Kenmore microwaves will stay running with fan and light on for a short time after food is cooked. The reason is to air out the microwave after cooking. Things like pop corn, Bacon etc. have strong smells after cooking. The ventilation helps to remove odors.

Convector element has failed. Time for a repair.

The sockets don't go 'bad'. They get damaged replacing the bulb or the bulb could be faulty.

Yes, a bad door interlock switch would cause this; either the top switch or the bottom switch. (The middle switch is called the Monitor switch. If it were bad, you microwave would blow fuses as soon as you press Start.)

It is 'Magnetron'. You shouldn't be in there Kate, there is heart stopping 120,000 volts, a poisonous heavy metal core in the magnetron and radiation that can blind you in 6 seconds. Qualified service personnel only on microwave ovens. Depending on age it is probably beyond ecomomic repair. If you have had it longer than 6 years, it is. It sounds like one of your new parts was the wrong part. If you bought them off eBay, they will be out of failed machines that have been scrapped, cleaned and resold. If you have some attraction to this oven, take it in for service. The technicians have the experience and the test equipment.

If you can get behind the display, on the back of the circuit board, you will find a capacitor. It needs replacing, or you just buy a new display.

It is from 1981, it is time for a new one. You are unlikely to get parts for one that old. It may be the button, but is more likely to be the contactor that the button activates. Take to a service centre and ask for a quote. Too dangerous to fix yourself. https://www.google.com/search?q=sears+kenmore+%2299896%22 ..

you will have to remove it. Not a big job. look online for instructions that came with unit.. Should be 2 screws thru bottom of kitchen cabinet

I do :>D 790 was correct. The link will take you there. https://www.searspartsdirect.com/manual/4q4n4k36js-000583/kenmore-elite-79048903000-wall-oven-microwave-combo-parts ..

Contaminated door switches will cause that.

You would better served replacing unit. Throwing parts at it is an unnecessary step.