Kenmore Cooktops - Answered Questions & Fixed Issues

Hello. I have the same issue. I called the appliance company and they will do research . My cooktop got progressively worse and now takes 30 mins plus to turn on

CALL CUSTOMER SERVICE WHERE YOU PURCHASED IT FROM

sounds like knob needs replacing (broken).

so does mine

Check out stovedecals.com - they offer Kenmore stove decals for your stove or cooktop.

Clear the lock mechanism -- as indicated by the DOOR LOC light -- by pressing and holding in the oven door light switch for 20 to 30 seconds. While the switch is depressed, the latch motor will gradually withdraw the lock, allowing you to open your oven door.

Shut your gas off at the tank or meter valve. Open windows and doors and vacate. Call an appliance or gas technician!

Suggest down load the owners manual online and reference error codes.

turn it off and disconnect all the electric. DO NOT mess with the gas. call a technician. Safety first.

You most likely have a failed oven sensor or the control / clock has failed. Self clean mode lets the oven get extremely hot and sometimes causes electronics to fail.

no body at fixya site will do anything you have to contact the service agent direct yourself to book a service

Searspartsdirect.com

uncontrolled power to the element check thermostat or wiring fault

Transformer is outputting to high. This may be a fire hazard. Be safe and recycle the unit.

ring a service dealer / agent for the information as they have it on a data base

this is because the gas is on full before the oven lights IT is an explosive situation and should be quickly corrected by an accredited gas fitter the soot indicates an incorrect burn ratio and that will be the major part of the problem

i know that it can be very difficult to have issues with your oven. the f93 on this model of kenmore range indicates that you have a problem with the oven door lock assembly (see image below). this can be caused by a failed oven door lock assembly, a wiring failure or a bad electronic oven control board. i recommend that you unplug the range and check the wiring between the components first. you can remove the upper back panel of the range to access the electronic oven control board in the console. you may need to remove the lower panel to access the door lock assembly on the back of the range. the image below shows the wiring diagram and other information that should help you check the wiring connections. check for a mechanical binding of the door lock assembly as well. if the wiring connections are okay, you will likely need to replace the oven door lock assembly. if you need further assistance, please reply to this thread. thank you for using manage my life.

THAT IS A PRETTY COOL STOVE,I WANT ONE!!! WHEN UNPLUGGED IT STILL COMES ON!!!! LOL!!!!! LOL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!,REPLACE THE SWITCH

no,check this out though, Kenmore Stove Range OVEN front door GLASS Part Number 5303325035 23 3 4 18... Kenmore Stove Parts eBay

Model number will be located on the data tag. This will be on the back or perhaps inside the over door area.