JVC Audio Players & Recorders - Page 8 - Recent Questions, Troubleshooting & Support

check the output section for leaks or blown up i.c with a digital multimeter otherwise whatsapp me on +254771066640

I would suggest going to the manufacturer's web site and look up the manual for your model. It should have something there on how to do a reset. Usually there is a factory reset area somewhere on the menu.

Mine is the same turn the tv sound off

Most audio inputs on the receiver require line level signals. Headphone jacks on laptops do not supply that signal level. You may have to direct the audio out on your laptop to supply a line level signal to the headphone jack if that is an option on the laptop.

Incorrect wiring,somethings not in order,check connections,speaker wires

Your speaker settings are probably in surround mode, so you’re not going to hear any audio in the rears/sides unless watching a movie that supports surround. Try changing the settings on your surround receiver to “All Channel Stereo” or “Multi Ch. Stereo” (if it supports it). You may need to toggle through the music or surround settings on the front of the receiver itself to get to it. It all depends on the age and brand of your AVR. If it’s newer, you might try using the mobile app to access the settings. Just remember to change it back to Dolby or DTS for watching movies. Hope that helps.

I have one for the UX-2000R which as far as I can see is the UK name for this model.
If it's any good to you I can scan the pages in and email them to you.

Is there a code for the jvc rx7010v that I can use to operate it off my spectrum universal remote. Same question for a Sony str-se501. Thanks

Ebay has several for sale. Try contacting vendors such as one with original box to see if they have an operating manual. Ebay service manual listings:https://www.ebay.com/itm/SERVICE-MANUAL-JVC-XL-V211BK-english-ORIGINAL-Schaltplan-Anleitung/153209780825?hash=item23ac03ba59:g:EWUAAOSwJkJWiC1c:rk:6:pf:0https://www.ebay.com/itm/JVC-Original-Service-Manual-fur-XL-V-211/401489267286?hash=item5d7aa00a56:g:nyoAAOSw-RFaecYS:rk:7:pf:0 https://www.ebay.com/itm/JVC-xl-v211-bk-service-manual-original-repair-book-stereo-cd-player/123395407801?hash=item1cbaf07fb9:g:nacAAOSwL4BZrbrG:rk:4:pf:0 https://www.ebay.com/itm/JVC-xl-v211-bk-service-manual-original-repair-book-stereo-cd-player/123395407801?hash=item1cbaf07fb9:g:nacAAOSwL4BZrbrG:rk:4:pf:0

The question is if the primary of the transformer is dead or the secondary? Or if something else has failed on the power board? What you can do is test around the board, using the meter with the earth lead connected to earth and see if you can see if there is any power anywhere on the board. If there is, the transformer must be good. And that either a regulator or other part (semi-conductor) has failed. Also check any big capacitors for trouble. Fuses only blow one there is a short. Something open circuit would not affect the fuse. But would kill the power.

Yes it should have an HDMI ARC connection.

Sounds like a bad soldering joint or bad connection on the connector.

Battery is available from VAPEX website http://www.vapextech.co.uk/c-2500mah-nimh-rechargeable-battery-59/ price 29/01/2016 £2.94 Postage £1.50 in the UK.

Power will not turn on pleas help

https://www.manualscenter.com/manuals/jvc/kda11-service-manual.html https://www.manualscenter.com/manuals/jvc/kda11-service-manual.html

Bad volume pod

Try the JVC website, they might have a free PDF of it.

try http://www.manualwanted.com