Jabra Radio Communications - Page 8 - Recent Questions, Troubleshooting & Support

Sounds like you lost the ground wire. It could be as simple as the wire in the plug, or it could be elsewhere in the wiring.

it auto pairs . set mobile phone to bluetooth on finger click on blue tooth and select discover bluetooth devices you should see mobile phone detect jabra vbt185z then pin is 0000 if asked http://uswww03.gnnetcom.com/jabra/verizon/vbt185z/Datasheet_VBT185z.pdf

You can do this by going to menu-settings then connectivity. Once there you simply select the option to turn ?on? Bluetooth. Some phones don't require you to go to settings first. They provide a separate connectivity icon on the top level of the menu page. Either way, once you turn the Bluetooth function on leave the phone open to the connectivity page. Now it's time to get your headset into pairing mode. Unfortunately each headset has a different way to accomplish this. You are going to have to read the instructions that came with the headset. In any event is a very simple process which usually consists of holding down a button for a specified amount of seconds until it beeps or flashes a sequence of colors that lets you know the headset is now ready to be paired. Easy so far right? Once in pairing mode, have your phone look for a ?hands-free device?. This is where leaving your phone open to the connectivity page comes in handy. Select the option ?look for devices? or ?hands-free?. After a couple of seconds your phone should recognize the headset. Once the phone finds the headset you will now have to select the headset from the list and put in the pin code provided with the headset. Most headsets will use 0000 or 1111 as a pin code. The whole process should take a first timer about 5 minutes. Tip 1: Make sure the Bluetooth device is fully charged! Tip 2: Have the pin code ready. Tip 3: Make sure the headset is within close proximity of the phone when pairing.

You don't need to unpair it. Turn off the headset. Hold the power/call button to make it discoverable. Add it from your new phone. It usually uses pin 0000 or 1234.

Good luck!

Every time i turned my jabra on the three beeps are in slow motion why?

then it is probably time for a new one

The battery has failed and unfortunately it cannot be replaced. You will need to replace the device. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/dave_fb2c45146b845cea

Nether me nor FIXYA has anything to do with your Jabra Oorder. Try to solve your problems with them. I don't undesrtand what you mean by listening music with an ear bug. Try to use some disinfectant to keep clean your ears of bugs.

delete it from your phone and then re search and pair

has it been 'paired' with your phone via bluetooth?

How do connect monte music player with jabra BT2035

why i cant listen music with my phone

Here's what fixed it for me (running Windows 8.1 on a Surface Pro 3): 1. On your taskbar, right click on your volume control options (the little speaker icon), and choose "Recording Devices." ALTERNATIVE: You can also get there from Control Panel, searching for "sound" and selecting "change sound card settings," then go to the "recording" tab. 3. Right click on the GN9350 and select "Properties." 4. Go to the "Listen" tab. 5. Unclick the "Listen to this device" checkbox. 6. Save and exit.

Thanks

zombie2001

Connecting a Bluetooth headset or car kit You can listen to music over a Bluetooth stereo headset, or have hands-free conversations using a compatible Bluetooth headset or car kit. It's the same procedure to set up stereo audio and hands-free.

• For you to listen to music with your headset or car kit, the headset or car kit must support the A2DP Bluetooth profile.
• Before you connect your headset, you need to make it discoverable so your phone can find it. You can find out how to do this by referring to your headset manual.

1. From the Home screen, press MENU, and then tap Settings > Wireless & networks.
2. Tap Bluetooth settings.
3. If the Bluetooth check box is not selected, select it to turn Bluetooth on.
4. Make sure that the headset is discoverable.
5. Tap Scan for devices. Your phone will start to scan for Bluetooth devices within range.
6. When you see the name of your headset displayed in the Bluetooth devices section, tap the name. Your phone then automatically tries to pair with the headset.
7. If automatic pairing fails, enter the passcode supplied with your headset.

The pairing and connection status is displayed below the hands-free headset or car kit name in the Bluetooth devices section. When the Bluetooth headset or car kit is connected to your phone, the Bluetooth connected icon is displayed in the status bar. Depending on the type of headset or car kit you have connected, you can then start using the headset or car kit to listen to music and/or make and receive phone calls.