Imperial Ovens - Recent Questions, Troubleshooting & Support

possible ga burner orfice blocked or low gas pressure

Depends what is wrong with it and if you are a competant electrician.

check with an online parts supplier

Try this site https://searchmanuals.net/search7/?keyword=%2Bowners+%2Bmanuals&gclid=CjwKCAiAqt7jBRAcEiwAof2uKwzE1jBmBNKl9hqWd4TyeToXsj80tGOrdxRc3s6LGEWtoEA-xsOXLBoCIhQQAvD_BwE

manufacturer or online search

since I have no model or serial, I assume this is an electric oven based on the description provided. this is usually an indication that the heating element has gone bad. possibly having a short to ground which completes a partial circuit in turn giving you heat and a light. I would look in this direction first.

this is usually and indication of a gas issue. either a gas pressure issue or the cut off valve not open all the way, or the hose connection is not completely on if it is a snap-on type.

this is a common indication that the ignition module is probably going bad or the flame sensor is not sensing the flame on the burners. There are other, more technical issues possible but this is usually the most common. The "not restart" , if referring to the burners, is an indication that the ignition module has "locked out" the system, usually after 3 failures of attempts to light the burners.

There seems to be a problem in the pilot light, possibly an obstruction.

If it's a customer I learned you will save yourself trouble and time which would equal the customer money a d everyone being better off if you just replace everything associated with what you need to remove to replace these. I'm not exactly sure what you are doing but I've spent hours messing with things trying to replace small parts. Like always order a wheel with a motor so u can just cut the wheel off. Just order a door that's handle is falling off and door is cocked. Not making door switch? Order that too.

I suspect the thermo coupler if there is one. I had to replace ours. I took it out and took it to a repair man and he sold me one just like it. Works good now. Make sure the parts are clean where the gas comes out as well The burner as well.

A model number would be needed http://www.imperialrange.com/resourcecenter.php imperial Commercial Cooking Product Resources