IFB Washing Machines - Popular Questions, Answers, Tips & Manuals
How to drain water from ifb top load washing machine
If you've ever had to deal with a flooded laundry room, you know how frustrating it can be to figure out how to drain water from an IFB top load washing machine. Fortunately, it's not as difficult as it may seem.
First, you'll need to locate the drain hose. This is usually located at the back of the machine, near the bottom. Once you've located the hose, you'll need to disconnect it from the machine. Then, you'll need to place the end of the hose in a bucket or sink.
Next, you'll need to turn off the power to the machine. This is important for safety reasons. Once the power is off, you can turn the water supply off. Then, you can turn the machine on and let it drain.
Finally, once the water has drained, you can turn the power back on and reconnect the drain hose. And that's it! You've successfully drained your IFB top load washing machine.
Now that you know how to drain water from an IFB top load washing machine, you can rest easy knowing that you'll never have to deal with a flooded laundry room again.
My ifb machine showing EAP error
Try resetting your washing machine then. Press the power button to restart the washing machine and in other cases, if the machine has a Cancel button then push it to clear the error and then push the Pause or Stop button to reset it.If the error message still shows up then the washing machine needs to be looked at from a repair person that fixes major appliances.
2/12/2021 8:15:24 AM •
IFB Washing...
•
16,912 views • 0 helpful votes
Top loader. What does E4 error indicate?
The E4 error indicates insufficient water for washing. This could be due to a restricted supply faucet, an inadequate supply, or a defective level sensor. Another possibility is a clogged or kinked drain hose.
How to solve ach1 error in ifb topload washing machine
If input voltage is too high then AC H1 error will come. So wait for sometime to stabilize the voltage then washing machine will start automatically. If not then call to your electrician to solve the power fluctuations
Laundry load is unbalanced. If laundry load is small. It can lead to an unbalanced condition. Add 1-2 similar items to help balance the load and rearrange load to allow proper spinning.
My IFB washing machine displays CH, What is the error?
On some IFB washers, the CH indicates that the child lock (control panel lock) has been activated to avoid accidental washer use. On the IFB digital 5 KG washer, you can toggle the child lock on and off by pressing the Soak Option and Delay Start buttons simultaneously. These are the second and fourth button for the Optional settings above the LCD display on this model. Below the keys, there is a skeleton key symbol in the center of a line drawn between these two keys. You can see this information in the manual for this machine in the manual,
http://www.ifbindustries.com/home_appliances/washing/manuals_new/DIGITAL_5_KGS.pdf . See page 9 (7 of the PDF) and page 13 (page 11 of the PDF).
I hope this helps. Please add a comment with your model number for information specific to your washer. If your washer uses a different set of keys to toggle the child lock on and off, you should look for the skeleton key symbol on the control panel housing. Any response to a follow-up comment may be delayed.
Cindy Wells
10/24/2019 9:49:41 AM •
IFB Washing...
•
1,999 views • 0 helpful votes
Not finding what you are looking for?