HP PhotoSmart - Recent Questions, Troubleshooting & Support - Page 8

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458034&cc=us&lc=en&dlc=en&product=3560280#N1027
go there, follow the steps and guides

Hi

There there to much to tell you what to do but I found a link for you to see it will tell you what to do just click on the link it will take you there.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458034&lc=en&dlc=he&cc=il&lang=he&rule=6783&product=3655608
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Try removing printhead and soak it in a window cleaninig solution for a few hours or overnight. We made instructions on how to remove printhead in the video below:

hi, 


its could be hardware issue, if you tell me which printer, then we can try some reset on that machine..........


Regards,  raj_p5983

Disable the godawful "RLT photo fix" in the print settings. Set "show preview before printing" to see where the print will appear on the paper.

The grinding noise is probably related to the carriage moving back and forth in the product. The good news is...it's still moving! :-)

I would recommend reviewing the steps for clearing a 'carriage jam' in the following section of HP customer care. Even though you do not have a total jam, there are some useful steps for checking the carriage path, to make sure all is clear. You can find the info here (I would pay special attention to Solution Three and Solution Four):

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01447224&lc=en&dlc=en&cc=us&product=1146331&rule=8836&lang=en

For the colours seeming washed out, I might check out the following information on HP's customer care website:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01580790&lc=en&dlc=en&cc=us&lang=en&rule=10306&product=1146331

I hope this information helps!

Thanks,

_K

https://support.hp.com/us-en/product/hp-officejet-pro-8620-e-all-in-one-printer-series/5367611/model/5385111/document/c04100778

Possibly you printer has two ink tanks ? a small black one and a large one ? If one is empty it will not print black. The better solution is to use a q-tip and some alcohol to clean the head. If the cartridges have been replaced - possibly the new one is defective? U might also try using the head clean option in the printer properties. Additionally sometimes the contacts for the cartridge are dirty or if they have been touched with fingers they will not work, alcohol again is recommended to clean those.

i do not have areason for why the printer continuously goes offline but there is a way to put it temporarily back online. Go to printers in the control panel. right click on d7260 and click on use printer online. This only seems to work for one or two docs before you have to repeat the process.

The most common reason for this is that the power input in the printer has a bad solder joint.
Wiggle the power connector at the back while the unit is powered up.
If it goes off, then that connector inside the printer just needs to be soldered back down.
The other possibility is that the power adapter itself is failing, which is really hard to test without another power adapter to test it with.

Verify no pieces of the card paper are missing and try printing on plain paper to make sure. Then try new card paper and make sure none of the perforations are separated.

Have you tried flushing out the clogged ink from the printhead with distilled water ?

Hi,


I believe, you are experiencing the issue with respect to drivers for the printer


If this is true, then please use the following link for the appropriate drivers.


http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1141647&cc=us&lc=en&dlc=en&product=1141647


Regards,

Sagarjd

Received a new HP Photosmart C6380 All in one wireless. Settin it up it calls for a passphrase. Where do I get the passphrase. I have looked on the router and in its booklet. No passphrase.

Hi Natraj, Go To Below official HP Printer Page For Your problem, Resolving Banding Missing Dots or White Streaks in Printed Output Hope It's resolve all Your HP Printer Problem, Or Still having Problem Then follow Us For HP Printer Support

It won't turn on just repeatedly on and off - HP Photosmart C5180 All-In-One InkJet Printer Check if the power cable is working correctly. Try to connect the printer using a different cable. If the issue persists, move to the next step. Connect the printer straight to a wall outlet rather than connecting to a surge protector. For Quick printer support Call Our Toll-Free 1-866-293-9220

unplug your printer and plug it again...

Resetting the product may help with some false error messages. Press power button to turn printer off, unplug the power cord, wait a few seconds, plug it back in, press power button to turn printer back on. Any luck?

Sorry, I've never had this fault. I assume the error is on the printer and not in the windows print manager? Have you ensured that there is no paper left in the printer and powered it down for a few minutes and then turned the power back on?

The 0xc18a0206 error code indicates that there is a fault with the ink cartridge. Follow the guidelines given below to resolve the issue. Replace the old ink cartridges with genuine ones. 1) Turn the printer on.Wait until it is silent. 2) Place plain paper in the input tray. 3) Lift-open the cartridge access door. Wait until the carriage moves to the cartridge access area. 4) Push the ink cartridge down to release it and pull it out from the slot. 5) Remove the plastic tapes from the ink cartridge. Do not touch the nozzles or electrical contacts. 6) Insert the new color ink cartridge into the left slot and the black ink cartridge into the right slot. 7) Close the in carrtidge access door and wait for the printer to begin the initialization process. 8) The printer prints an alignment page once the process is complete. Scan the page to align the ink cartridges. Reset the printer ? Power on the printer and disconnect the USB cable from the printer. ? Remove the ink cartridges from the printer. ? Unplug the power cord while the printer is still on. ? Reconnect it to the printer after about 60 seconds. ? Wait until the printer is silent and idle. ? Reinstall the ink cartridges and print a calibration page if prompted. ? Connect the USB cable to the printer and try to print. Service your printer If the issue persists, take your printer to the manufacturer for a service. Call our Toll-Free 1-866-293-9220 or Visit http://123-hp.business/