HP LaserJet - Recent Questions, Troubleshooting & Support - Page 5
HP Printer Error code 55.1
Each of us has ever had at least one worry about choosing technique. You know, I didn't know what brand should I use in order to have more advantages from it. However, once my friend told me about this article:
Dell vs HP - Which Brand is Better? So that I decided which is better and now my problem is gone. I think it will be also practical for you.
13.02.00 paper jam in HP 5200
The 13.02 error message indicates that paper did not clear the top of page sensor (PS103) within the specified amount of time allotted by the DC Controller. This sensor is located underneath the registration assembly
HOW DO I MAKE A
You cannot make a copy if you are thinking of it like a photocopier. It doesn't have a scanner built into it .
If this is what you are thinking there are several quite excellent scanners out there fairly cheap. The scanner will come with software that will make it and the printer behave like a photocopier. The scanner we use at home even has a button that we just press to scan and print a copy as well as software that gives more options.
If you want to just print multiple copies of the page then this you can do. You just have to go to print options on a program menu and tell it to print the page how many times you need. You can also change the number on the printer driver but if you don;t set it back after everything after is going to print a few extra copies.
943 service print head error
sounds like a mirror motor error(this is the laser mirror that spins very fast 20k rpms, you hear the sound when its about to print ,sounds like a jet spinning up). In this case you will need a pro to look at it or replace the machine....
Drivers
I loss the drivers of HP LaserJet 1020 printer. I need now. Please help me.
Code Error B0605
B0605 message. Follow HP's directions at
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01687323&lang=en&cc=us&conte...
and put the printer in BootCode mode then ran the firmware updater.
The directions indicated that the printer would restart on it's own, but if does not, so let the printer sit for about a minute after the Firmware Updater says it was done, then power down the printer and pull out it's power cord. Let it sit for about 15 seconds, then plug it back in and start it up. When the printer starts up, the printer's display may go through a bunch of messages (Erasing...) for a few seconds. When it finishes with all of the messages, you should be able to print to the printer again.
I hope this helps. Regards, Mike
Not finding what you are looking for?