HP dc - Recent Questions, Troubleshooting & Support - Page 2

so what is the 1st drive, and is it IDE or SATA. or is one a why are you using XP is it 32bit or 64? ill answer for 32.. its a dead OS,totally dead,and virus magnet and the MS PnP severs are shut down. XP also MUST have the SP3 installed or the THING cant find any modern, SATA chips and many other devices. im looking at your MOBO now, it has 4 sata jacks 1 floppy and 1 IDE jack let me guess this is what Drive one, IDE (pata) is plugged in , then you add a new sata drive to the old sata ports and XP pukesssss, as all XP does (cept mine) SSDD. Same stuff different day, so you can either use w7 like all savvy folks do or find the driver missing that MS cant find, XP is dead. but wait XP needs a Floppy drive to load the correct driver. but if XP is running now, we dont need that only on XP installs. ive no idea on what sata chip is there, in our shop we scan it to find that and HP does not tell this. Pentium D processor Intel 945G Express i think this is it , the 945G load this driver from HP https://support.hp.com/us-en/drivers/selfservice/hp-compaq-dc7600-convertible-minitower-pc/472276 32bit File name: sp38488.exe (2.0 MB)

WHY BOTHER ? , why risk bricking it.?why not ask HP how to do that, (fixya is not HPi think you are like 1 , in 1billion owners doing this.?but is done by value added PC re-sellers, and is covered in the HP books. (if lucky some are not;.)here is HP real, ask them?https://h30434.www3.hp.com/ ftp://ftp.hp.com/pub/softpaq/sp58001-58500/sp58176.htmlhttps://h30434.www3.hp.com/t5/forums/searchpage/tab/message?q=+HP+Ereplogo+Utility+&collapse_discussion=trueeRepLogo.efi tool to modify boot logoask HP IF your PC can do this.first.always ask first, not brick the BIOS ,that be bad.

Make sure your Sata connection start from Sata 0 and on up. You'll get the 1796 error when you have sata drives or devices plugged in other sata connections, Like: Your first Hard drive in sata 0 your second drive in sata 1 your optic drive in sata 2....You system (BIOS) will automatically start at sata 0 then sata 1 and so fourth. hope this helps ya and thank you for using FixYa. If you need further help, I’m available over the phone at https://www.6ya.com/expert/william_02fc2766c1e13b73

there are many things on any desktop to turn off or on. what might yours be. main power botton on Desktop or the monitor. sorry can't guess whats stuck on. the word IT is missing above, change the missing it, to a noun. please.

http://support.hp.com/us-en/product/HP-Compaq-dc7600-Desktop-PC-series/472276/model/472278/document/c01682745/ Go to this page and make sure you have matched pairs of memory preferably all the same size and speed.

Try changing the server port in the server.properties file. There may be another program using this port. If that does not wor try to start the server without being connected to a network (note when the server is changed you must append it to the ip. For example 192.168.1.2:25564)

Open Google. and Type "Driver Identifier" in Search Box so driveridentifier website open and download mini software Install it and then find your driver

You need to find out what motherboard it is. Then, see if that motherboard can handle that processor.

DC5000MT (i think you left off the"T" right?) MT=mini-tower then. they at SFF then too. old old desktop pentium 4, with pata hard drive? no monitor stated, make nor model # no vga card stated. migrating? oops.. why do that? nor if PC ran before? NO OS stated,? windows XP what? (it came with XP) ok the mobo turns on with case power button? and the CPU fan spins fast, as does PSU fan? what does USB ports mean>? using what there? PS/2 keyboard. using that? or pS2/mouse? does it beep:? are you sure the monitor is ok? if monitor is ok ? and PSU and 1 stick of ram is ok the BIOS screens work. or the PSU does this mobo have onboard VGA jack GPU:> if yes, try both it and PCI video card. and 1 stick of ram at a time. slot1, bank 0

which form factor... google it then go to youtube look for video on changing ram

old post , from dead file via SPAMMER.p4 processor is a dog ,not 64bitand 4gig max, 3.5g actually with XP or Vista SEE PAGE 50, FoUR 1GIG STICKS IS MAX http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/action.process/public/psi/manualsDisplay/?sp4ts.oid=472276&javax.portlet.action=true&spf_p.tpst=psiContentDisplay&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.prp_psiContentDisplay=wsrp-interactionState%3DdocId%253Demr_na-c00383428%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken let me guess, 1gb now and want 44 will only give you 3.5g. win 3b2 limits.

Most boards have in real small print, where all the pins go for the front panel. The manufacturer will also have this PDF information for quite a few years on HP.com Oh, the print is just outside the pin block and it's abbreviated - Also the + will indicate the dominate color location. So a red and white cable - The red cable side would be on the +. the pin locations are also color coded in most cases. Hope this is helpful, thank you for visiting FixYa.com If you need further help, I’m available over the phone at https://www.6ya.com/expert/william_02fc2766c1e13b73

pls open the case and find the port power and data, you can buy or replace another DVD Rw easily

Se puede extraer en este enlace http://support.hp.com/us-en/document/bph07107 sobre c?mo solucionar su problema CV placa base. Si se sigue produciendo el problema, buscar un t?cnico inform?tico para comprobar en su ordenador.

Deinstall that program from control panel-> programs and features

Some power supply's loose the -5 volt part of the supply. Try a different power supply.

I actually had to track part of your posting to discover what you were talking about. The software you were attempting to use appears to have tried to change your screen resolution to something beyond the range of settings of your monitor. You accessed online chat help and were informed to adjust your monitor resolution to different settings. Subsequently, you have found yourself staring at a white screen and unable to see dialogue boxes. The software you appear to have been trying to use was Yahoo Messenger and Paltalk. It would be nice to know what the original monitor settings were. In fact, you should always post the monitor brand and model number with questions such as this. It would also be nice to know what operating system you were using. Your monitor may have an auto button (short for auto configuration). Pressing that might restore the default settings. If you can take a look at the monitor's manual, usually accessable by going to the brand site and searching for the model number, you might find relevant instructions regarding any such button. If you can't fix the monitor configuration via the buttons on the monitor, you may have to resort to a system restore to a date prior to the original error message of "out of range" appearing. That may remove any problematic software that you installed that yielded the original problem. Write down the display settings (the resolution) before trying run anything that might yield an out of range message again. I can't say at this point if you need to go into "safe mode" on boot or not. There is a wee possibility that just going into safe mode and then rebooting might yield you a readable screen. You would then have to change the resolution of one you are comfortable with.

remobe the CR2032 for 15 minutes and the put back

CR2032