Hoshizaki Freezers - Answered Questions & Fixed Issues
Hoshizaki F-450maf has no water in reservoir tank
If the Hoshizaki F-450maf ice machine's reservoir tank has no water, you should first check that the machine is properly connected to a water supply and that the water supply valve is turned on. You should also check that the machine's water filter is clean and not clogged. Additionally, make sure that the float switch is functioning properly and that it is not stuck in the "off" position. If these steps do not resolve the issue, you may need to consult the machine's manual or contact a professional for further assistance.
2/14/2023 8:15:39 AM •
Hoshizaki...
•
Answered
on Feb 14, 2023
•
375 views
HOSHIZAKI MODULAR FLAKER IS TRIPPING 1A FUSES WHEN TURN ON THE SWITCH.
Question edited for typo.
Question moved from Washing Machines Category.
Please don't type in all CAPS, it is considered SHOUTING and rude, plus harder to read.
You have a dead short to earth. Strip off all the panels and look for water where it shouldn't be and chaffed cables especially near holes in the casing. If you can't find anything, you need to check individual items, compressor, pump, and grinder with a multimeter. Or just call for service.
2/8/2023 4:06:01 AM •
Hoshizaki...
•
Answered
on Feb 08, 2023
•
116 views
Hoshizaki ice machine beep 3
in the freeze cycle too long. Most common is the water valve leaking through. Second thing to check is for a stuck float switch.
4/19/2022 11:35:44 PM •
Hoshizaki...
•
Answered
on Apr 19, 2022
•
11,195 views
I need a copy of the service & cleaning
Factory phone number is 1-800-438-6087
They may supply it for you, or give you contact information for the nearest contracted service representative.
3/22/2022 12:39:23 PM •
Hoshizaki...
•
Answered
on Mar 22, 2022
•
109 views
I have a hoshizaki freezer model FH1-AAC-HD, it stay on def
this is a large misconception of this unit. After a defrost cycle is completed, the display stays in "DEF" or "REC" until the box temp reaches 14 degrees of the "set" temp. So, if you have it set on zero, the conditioned space has to get to 14 degrees and then the display will switch over and show the temp. One way to verify this, is if the display shows DEF, check to see if the compressor is running, if so, then this scenario applies.
1/26/2018 3:51:33 AM •
Hoshizaki...
•
Answered
on Jan 26, 2018
•
1,065 views
Kml 400 mae water pump
hoshizaki ice maker kml 400 mae is not making enough ice after i cleaned it.
12/17/2017 8:09:28 PM •
Hoshizaki...
•
Answered
on Dec 17, 2017
•
398 views
Hoshizaki Model KM500MAH
When first turned on, the sump should fill with water. If it does, water solenoid is good. If you have a full sump, and no water pump running, sometimes the "Ice/Off/Wash" switch is bad. Put switch in wash, if pump runs, it's good. Now put in Ice position, if sump fills and pump does not come on and compressor indicates it is in the freeze cycle, replace that switch first. Simplest place to start and lest costly to fix.
10/5/2017 1:45:52 AM •
Hoshizaki...
•
Answered
on Oct 05, 2017
•
466 views
Not finding what you are looking for?