Hilti Drills - Page 9 - Recent Questions, Troubleshooting & Support

any good electronic shop should be able to assist are you sure its the regulator and not needing new brushes as hilti,s are prone for the brushes wearing out

are you using the right SDS bits? second there is a selector on the side for heavy hammer, light hammer and drill only, make sure that you have the selector in the proper position and then you would need to apply slight pressure to the bit for the hammering action to start, if youhave done all these I would take it back for warranty replacement or repair. Hilti is very good about warrantys.

hilti drill I bought at an auction has been a dud - by ...

lumberjocks.com/topics/48738

Apr 9, 2013 - 16 posts - ‎13 authors please can anyone help I bought a hilti drill at auction when I got it home it ... I won't do this but anyway I have discovered through the internet the ... anyone maybe in the uk have any idea how to bypass this system to .... There must be a microswitch or something inside that can be reset. ... taw70r23's Profile.Missing: fob

heres a service manual i uploaded to dropbox for you hilti te505 pdf

what oil do I use in a te80 hammer drill

replace a burnt out motor

Try calling Hilti Customer service (toll-free), or look for a nearby Hilti service center. Contact info for the United States is linked below. Results for My preferred Hilti Centers

contact hilti on the net or a service dealer for hilti.

pull straight out on the fitting and push drill in

Claudette, From my experience with Hilti tools, you have to send the tool back to them for repair. I have not had much luck in getting any parts from them. Sorry!

This is a problem we have encountered many times. There is usually a good supply of Hilti for sale used. See if you can find a drill the same as yours and swap out the parts.