Hannspree Televison & Video - Page 2 - Recent Questions, Troubleshooting & Support

http://translate.google.com Secret service menu Hannspree HSG1113 https://electronicshelponline.blogspot.com/2015/03/hannspree-lcd-tv-how-to-enter-service.html Possible menu - Quoting from link above: SERVICE MODE [Hanspree AT06 42" LCD TV] (Horizontal Frequency 31.5KHz to 48KHz) * In the TV mode, adjust volume to Zero and press number keys 9 > 8 > 7 > 6 to enter service mode. * To exit, press the EXIT button on the remote control. SERVICE MODE (Hanhspree GT02 32E - GT03-37E1) 1 Switch on the LCD TV . 2 Press 9-9-1 on the remote control to enter the internal Service menu. 3 Press MENU to switch the service mode pages. 4 Press ?? to scroll through the various menu options. 5 Press ?? to change the menu settings. 6 Press MENUto save the new settings and switch to next page and press EXITto exit from service mode to normal mode. TV / AV / S-VIDEO / WHITE BALANCE / BRIGHTNESS & CONTRAST ADJUSTMENTS WHITE BALANCE ADJUSTMENT 1 Press 991 on the remote control to enter the internal Service menu. 2 Press MENU to switch to the PW106 Scaler Menu page 3 Press ?? to scroll to Page 2-3 options 4 Press ?? to adjust the Offset Red, Offset Blue, Gain Red, Gain Blue menu settings. 5 Press EXIT to save the new settings and exit. [Don't adjust others setting in page 2-3] Click on the Pictures to Zoom In BRIGHTNESS ADJUSTMENT 1 Repeat the above mentioned step 1 to 2 2 Press ?? to scroll to PW106 FE VDC Menu Page 2-1 options 3 Press ?? adjust the Brightness setting. 4 Press ?? to scroll to TV/AV/S Parameter=AV1 setting and pressuto run the setting. (This procedure will copy the settings of AV1 to S & TV) ATSC DTV WHITE BALANCE / BRIGHTNESS / CONTRAST ADJUSTMENT 1 Repeat the above mentioned step 1 to 2 2 Press ?? to scroll to PW106 Scaler Menu Page 2-3 options 3 Press ?,? to adjust the Offset Red, Offset Blue, Gain Red, Gain Blue menu settings 4 Press to save the new settings and exit. [Don't adjust others settings in page 2-3] YCbCr & YpbPr of COMPONENT 1, 2 WHITE BALANCE/BRIGHTNESS/CONTRAST ADJUSTMENT Getting COMPONENT-1 connect to 1080i signal. (The settings could not be saved if signals input from COMPONENT 2 or connect to other sources such as 720P, 480P, 480i,etc. WHITE BALANCE ADJUSTMENT OF Component 1] Repeat the above mentioned step 1 to 2 2] Press ?? to scroll to PE106 FE ADC page 2-3 options 3] Press ?? to adjust the Offset Red and Off Blue settings. 4] Press ??to adjust the Offset Green setting. 5] Press ?? to adjust the Gain Green setting. 6] Press ?? to scroll to 480i/480P/720P Parameter=1080i setting and press ? to run the setting. (This procedure will copy the setting of 1080i to 480i/480P/720P) 7] Press EXIT to save the new settings and exit. WHITE BALANCE ADJUSTMENT OF PC INPUT 1.Connecting to VGA Timing mode 2.Under service mode, Press ?? to scroll to PE106 FE ADC page 2-2 options 3.Press ?? to adjust the Offset Red, Offset Green and Off Blue settings. 4.Press ?? to adjust the Gain Red and Gain Blue settings. 5.Press EXIT to save the new settings and exit.

Hello, Mike - Hannspree North America: 888-808-6789 ( Mon - Fri: 8:00am to 5:00pm (Eastern Time) Source: http://www.hannspree.com/US/EN/ContactUs.aspx Hannspree Europe See: http://www.hannspree.eu/en/about-hannspree/contact-us Germany, France, Italy, United Kingdom, Spain & Portugal Best wishes.

Europe or the USA - different phone numbers. https://www.google.com/search?q=HANNSPREE+TV+HELP+PHONE+NUMBER&ie=utf-8&oe=utf-8&client=firefox-b-1-ab

Last page of this free monitor has the corporate phone numbers in many countries you could call for manual. Link below is for a monitor and not a tv, but note the phone numbers and email addresses. http://office.manualsonline.com/manuals/mfg/hannspree/xm_1.html

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

I would get the TV replaced under guarantee. There maybe a loose wire in the power supply or invertor stages that is arcing and burning

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

Unplug the television from mains first take the batteries out the remote then plug the tele back and switch on from the television see what happens if it goes back to normal the you have the volume bottons jammed on your remote control